Fwd: Home Web Server

am 13.05.2009 16:25:03 von Justin Zhang

--0016e647643a29de930469cbfafc
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

My apache web server is connected as the diagram through DLink router,Phone
adapter and Shaw cable modem.

http://en.wikipedia.org/wiki/File:Voip-typical.gif

Question, I can brower my web site by http://192.168.0.100/ within local
network. How can I browse my web site from computer over internet? I check
my IP address from myIPaddress and get

*24.78.136.243* I try to browser with http://24.78.136.243/ but cannot open
it. I got following message.

What should I do to publish my website over internet?

Thanks,

Justin

Internet Explorer cannot display the webpage
Most likely causes:

- You are not connected to the Internet.
- The website is encountering problems.
- There might be a typing error in the address.

What you can try: Diagnose Connection Problems [image: More
information] More information

This problem can be caused by a variety of issues, including:

- Internet connectivity has been lost.
- The website is temporarily unavailable.
- The Domain Name Server (DNS) is not reachable.
- The Domain Name Server (DNS) does not have a listing for the website's
domain.
- If this is an HTTPS (secure) address, click Tools, click Internet
Options, click Advanced, and check to be sure the SSL and TLS protocols are
enabled under the security section.

*For offline users*

You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds

1. Click the Favorites Center button , click Feeds, and then click the
feed you want to view.

To view recently visited webpages (might not work on all pages)

1. Click Tools , and then click Work Offline.
2. Click the Favorites Center button , click History, and then click the
page you want to view.

--0016e647643a29de930469cbfafc
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

My apache web server is connected as the diagram through DLink router,=
Phone adapter and Shaw cable modem.

=A0

=3D"_blank">http://en.wikipedia.org/wiki/File:Voip-typical.g if

=A0

Question, I can brower my web site by " target=3D"_blank">http://192.168.0.100/=A0within local network. How c=
an I browse my web site from computer over internet? I check my IP address =
from myIPaddress and get=20

24.78.136.243 I try to browser with 43/" target=3D"_blank">http://24.78.136.243/ but cannot open it.=A0 I g=
ot following message.

What should I do to publish my website over internet?

=A0

Thanks,

=A0

Justin

=A0

Internet Explorer cannot display the webpage

=A0

Most likely causes:

You are not connected to the Internet.=20
The website is encountering problems.=20
There might be a typing error in the address.

=A0

What you can try:

=A0

table>

Diagnose Connection Problems

=A0

table>

This problem can be caused by a variety of issues, including:=20

Internet connectivity has been lost.=20

The website is temporarily unavailable.=20

The Domain Name Server (DNS) is not reachable.=20

The Domain Name Server (DNS) does not have a listing for the website=
9;s domain.=20

If this is an HTTPS (secure) address, click Tools, click Internet Optio=
ns, click Advanced, and check to be sure the SSL and TLS protocols are enab=
led under the security section.

For offline users

You can still view subscribed feeds and some recently viewed webpages. r>To view subscribed feeds=20

Click the Favorites Center button , click Feeds, and =
then click the feed you want to view.

To view recently visited webpages (might not work on all pages)=20

Click Tools , and then click Work Offline.=20

Click the Favorites Center button , click History, an=
d then click the page you want to view.

More information

v>

--0016e647643a29de930469cbfafc--

Re: Fwd: Home Web Server
am 13.05.2009 16:38:27 von Eric Covener
On Wed, May 13, 2009 at 10:25 AM, Justin Zhang
wrote:
> My apache web server is connected as the diagram through DLink router,Pho=
ne
> adapter and Shaw cable modem.
>
> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>
> Question, I can brower my web site by http://192.168.0.100/=A0within loca=
l
> network. How can I browse my web site from computer over internet? I chec=
k
> my IP address from myIPaddress and get
>
> 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot open
> it.=A0 I got following message.
>

It's a limitation of many home routers that you can't use your
externally routable IP address from within the LAN.

--=20
Eric Covener
covener@gmail.com

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

RE: Fwd: Home Web Server
am 13.05.2009 16:43:29 von Michael.Griffith
Isn't it possible the router doesn't know how to route the inbound =
request from the internet IP? Most/all routers have a configuration =
interface accessible via a browser. If you can get to the =
configuration, make sure that port 80 is open, and that the router is =
forwarding the request to the machine with the .100 NAT address...

-----Original Message-----
From: Eric Covener [mailto:covener@gmail.com]=20
Sent: Wednesday, May 13, 2009 9:38 AM
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server

On Wed, May 13, 2009 at 10:25 AM, Justin Zhang =
wrote:
> My apache web server is connected as the diagram through DLink=20
> router,Phone adapter and Shaw cable modem.
>
> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>
> Question, I can brower my web site by http://192.168.0.100/=A0within=20
> local network. How can I browse my web site from computer over=20
> internet? I check my IP address from myIPaddress and get
>
> 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot=20
> open it.=A0 I got following message.
>

It's a limitation of many home routers that you can't use your =
externally routable IP address from within the LAN.

--
Eric Covener
covener@gmail.com

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server =
Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 16:44:21 von Justin Zhang
--0016362853de333b040469cc3f74
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Thank you for the quick reply. How do I know which external IP address is
right. I got 2 different address from myIPaddress with & without phone
router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
ServerName 24.78.147.173:80
Thanks
Justin

On Wed, May 13, 2009 at 7:38 AM, Eric Covener wrote:

> On Wed, May 13, 2009 at 10:25 AM, Justin Zhang
> wrote:
> > My apache web server is connected as the diagram through DLink
> router,Phone
> > adapter and Shaw cable modem.
> >
> > http://en.wikipedia.org/wiki/File:Voip-typical.gif
> >
> > Question, I can brower my web site by http://192.168.0.100/ within local
> > network. How can I browse my web site from computer over internet? I
> check
> > my IP address from myIPaddress and get
> >
> > 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot
> open
> > it. I got following message.
> >
>
> It's a limitation of many home routers that you can't use your
> externally routable IP address from within the LAN.
>
> --
> Eric Covener
> covener@gmail.com
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016362853de333b040469cc3f74
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thank you for the quick reply. How do I know=A0which external IP addre=
ss is right. I got 2 different address from myIPaddress with & without =
phone router. 24.78.136.243 and 24.78.147.173. Is my configuration right? S=
erverName

Thanks

Justin

On Wed, May 13, 2009 at 7:38 AM, Eric Covener pan dir=3D"ltr"><covener@gmail.com<=
/a>> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

On Wed, May 13, 2009 at 10:25 AM, Justin Zhang
< href=3D"mailto:justinzhang1969@gmail.com">justinzhang1969@gm ail.com>=
wrote:
> My apache web server is connected as the diagram through DL=
ink router,Phone

> adapter and Shaw cable modem.
>
> ipedia.org/wiki/File:Voip-typical.gif" target=3D"_blank">http://en.wikipedi=
a.org/wiki/File:Voip-typical.gif
>
> Question, I can brower=
my web site by http://=
192.168.0.100/=A0within local

> network. How can I browse my web site from computer over internet? I c=
heck
> my IP address from myIPaddress and get
>
> 24.78.1=
36.243 I try to browser with lank">http://24.78.136.243/ but cannot open

> it.=A0 I got following message.
>

It's a limita=
tion of many home routers that you can't use your
externally routabl=
e IP address from within the LAN.

--
Eric Covener
ailto:covener@gmail.com">covener@gmail.com

------------------------------------------------------------ --------- r>The official User-To-User support forum of the Apache HTTP Server Project=
..
See <URL: =3D"_blank">http://httpd.apache.org/userslist.html> for more info. r>
To unsubscribe, e-mail: g">users-unsubscribe@httpd.apache.org
=A0 " =A0 from the digest=
: users-digest=
-unsubscribe@httpd.apache.org

For additional commands, e-mail: org">users-help@httpd.apache.org

--0016362853de333b040469cc3f74--

Re: Fwd: Home Web Server
am 13.05.2009 16:45:49 von Justin Zhang
--0016e646477e767bc40469cc4439
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

My configuration is Listen 192.168.0.100:80

On Wed, May 13, 2009 at 7:43 AM, Griffith, Michael * <
Michael.Griffith@fda.hhs.gov> wrote:

> Isn't it possible the router doesn't know how to route the inbound request
> from the internet IP? Most/all routers have a configuration interface
> accessible via a browser. If you can get to the configuration, make sure
> that port 80 is open, and that the router is forwarding the request to the
> machine with the .100 NAT address...
>
> -----Original Message-----
> From: Eric Covener [mailto:covener@gmail.com]
> Sent: Wednesday, May 13, 2009 9:38 AM
> To: users@httpd.apache.org
> Subject: Re: [users@httpd] Fwd: Home Web Server
>
> On Wed, May 13, 2009 at 10:25 AM, Justin Zhang
> wrote:
> > My apache web server is connected as the diagram through DLink
> > router,Phone adapter and Shaw cable modem.
> >
> > http://en.wikipedia.org/wiki/File:Voip-typical.gif
> >
> > Question, I can brower my web site by http://192.168.0.100/ within
> > local network. How can I browse my web site from computer over
> > internet? I check my IP address from myIPaddress and get
> >
> > 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot
> > open it. I got following message.
> >
>
> It's a limitation of many home routers that you can't use your externally
> routable IP address from within the LAN.
>
> --
> Eric Covener
> covener@gmail.com
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e646477e767bc40469cc4439
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

My configuration is Listen 192.168.0.10=
0:80

On Wed, May 13, 2009 at 7:43 AM, Griffith, Micha=
el * <=
Michael.Griffith@fda.hhs.gov> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Isn't it possible the router=
doesn't know how to route the inbound request from the internet IP? Mo=
st/all routers have a configuration interface accessible via a browser. =A0=
If you can get to the configuration, make sure that port 80 is open, and th=
at the router is forwarding the request to the machine with the .100 NAT ad=
dress...

-----Original Message-----
From: Eric Covener [mai=
lto:]
Sent: We=
dnesday, May 13, 2009 9:38 AM
To: rg">users@httpd.apache.org

Subject: Re: [users@httpd] Fwd: Home Web Server

On Wed, May 13, 2009=
at 10:25 AM, Justin Zhang < >justinzhang1969@gmail.com> wrote:
> My apache web server is c=
onnected as the diagram through DLink

> router,Phone adapter and Shaw cable modem.
>
> http://en.wikipedia.org/wiki/File:Voip-typical.gif" target=3D"_blank">http:=
//en.wikipedia.org/wiki/File:Voip-typical.gif
>
> Question,=
I can brower my web site by lank">http://192.168.0.100/=A0within

> local network. How can I browse my web site from computer over
>=
internet? I check my IP address from myIPaddress and get
>
> 2=
4.78.136.243 I try to browser with =3D"_blank">http://24.78.136.243/ but cannot

> open it.=A0 I got following message.
>

It's a limitat=
ion of many home routers that you can't use your externally routable IP=
address from within the LAN.

--
Eric Covener
o:covener@gmail.com">covener@gmail.com

------------------------------------------------------------ --------- r>The official User-To-User support forum of the Apache HTTP Server Project=
..
See <URL: =3D"_blank">http://httpd.apache.org/userslist.html> for more info. r>
To unsubscribe, e-mail: g">users-unsubscribe@httpd.apache.org
=A0 " =A0 from the digest=
: users-digest=
-unsubscribe@httpd.apache.org

For additional commands, e-mail: org">users-help@httpd.apache.org

---------------------------=
------------------------------------------
The official User-To-User sup=
port forum of the Apache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: u=
sers-unsubscribe@httpd.apache.org

=A0 " =A0 from the digest: httpd.apache.org">users-digest-unsubscribe@httpd.apache.org
For addi=
tional commands, e-mail: use=
rs-help@httpd.apache.org

--0016e646477e767bc40469cc4439--

Re: Fwd: Home Web Server
am 13.05.2009 16:47:56 von Frank Gingras
Some routers can re-route packets to the internal network, some can't.

If your router cannot do this, you must use the internal IP of your
server. See the documentation on your operating system to obtain that IP.

Frank.

Griffith, Michael * wrote:
> Isn't it possible the router doesn't know how to route the inbound request from the internet IP? Most/all routers have a configuration interface accessible via a browser. If you can get to the configuration, make sure that port 80 is open, and that the router is forwarding the request to the machine with the .100 NAT address...
>
> -----Original Message-----
> From: Eric Covener [mailto:covener@gmail.com]
> Sent: Wednesday, May 13, 2009 9:38 AM
> To: users@httpd.apache.org
> Subject: Re: [users@httpd] Fwd: Home Web Server
>
> On Wed, May 13, 2009 at 10:25 AM, Justin Zhang wrote:
>
>> My apache web server is connected as the diagram through DLink
>> router,Phone adapter and Shaw cable modem.
>>
>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>>
>> Question, I can brower my web site by http://192.168.0.100/ within
>> local network. How can I browse my web site from computer over
>> internet? I check my IP address from myIPaddress and get
>>
>> 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot
>> open it. I got following message.
>>
>>
>
> It's a limitation of many home routers that you can't use your externally routable IP address from within the LAN.
>
> --
> Eric Covener
> covener@gmail.com
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 16:52:23 von Justin Zhang
--0016364ecd80eea9c10469cc5b49
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Do you mean ipconfig? I got 192.168.0.100 for my server computer

On Wed, May 13, 2009 at 7:47 AM, Frank Gingras
wrote:

> Some routers can re-route packets to the internal network, some can't.
>
> If your router cannot do this, you must use the internal IP of your server.
> See the documentation on your operating system to obtain that IP.
>
> Frank.
>
>
> Griffith, Michael * wrote:
>
>> Isn't it possible the router doesn't know how to route the inbound request
>> from the internet IP? Most/all routers have a configuration interface
>> accessible via a browser. If you can get to the configuration, make sure
>> that port 80 is open, and that the router is forwarding the request to the
>> machine with the .100 NAT address...
>>
>> -----Original Message-----
>> From: Eric Covener [mailto:covener@gmail.com] Sent: Wednesday, May 13,
>> 2009 9:38 AM
>> To: users@httpd.apache.org
>> Subject: Re: [users@httpd] Fwd: Home Web Server
>>
>> On Wed, May 13, 2009 at 10:25 AM, Justin Zhang
>> wrote:
>>
>>
>>> My apache web server is connected as the diagram through DLink
>>> router,Phone adapter and Shaw cable modem.
>>>
>>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>>>
>>> Question, I can brower my web site by http://192.168.0.100/ within local
>>> network. How can I browse my web site from computer over internet? I check
>>> my IP address from myIPaddress and get
>>>
>>> 24.78.136.243 I try to browser with http://24.78.136.243/ but cannot
>>> open it. I got following message.
>>>
>>>
>>>
>>
>> It's a limitation of many home routers that you can't use your externally
>> routable IP address from within the LAN.
>>
>> --
>> Eric Covener
>> covener@gmail.com
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016364ecd80eea9c10469cc5b49
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Do you mean ipconfig? I got 192.168.0.100 for my server computer

On Wed, May 13, 2009 at 7:47 AM, Frank Gingras <=
span dir=3D"ltr"><francois=
..gingras@gmail.com> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Some routers can re-route packet=
s to the internal network, some can't.

If your router cannot do =
this, you must use the internal IP of your server. See the documentation on=
your operating system to obtain that IP.

Frank.=20

Griffith, Michael * wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Isn't it possible the router=
doesn't know how to route the inbound request from the internet IP? Mo=
st/all routers have a configuration interface accessible via a browser. =A0=
If you can get to the configuration, make sure that port 80 is open, and th=
at the router is forwarding the request to the machine with the .100 NAT ad=
dress...

-----Original Message-----
From: Eric Covener [mailto: lto:covener@gmail.com" target=3D"_blank">covener@gmail.com] Sent: Wedne=
sday, May 13, 2009 9:38 AM
To: target=3D"_blank">users@httpd.apache.org

Subject: Re: [users@httpd] Fwd: Home Web Server

On Wed, May 13, 2009=
at 10:25 AM, Justin Zhang < target=3D"_blank">justinzhang1969@gmail.com> wrote:
=A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">My apache web server is connecte=
d as the diagram through DLink router,Phone adapter and Shaw cable modem. r>

=3D"_blank">http://en.wikipedia.org/wiki/File:Voip-typical.g if

Q=
uestion, I can brower my web site by et=3D"_blank">http://192.168.0.100/ within local network. How can I bro=
wse my web site from computer over internet? I check my IP address from myI=
Paddress and get

24.78.136.243 I try to browser with arget=3D"_blank">http://24.78.136.243/ but cannot open it. =A0I got fol=
lowing message.

=A0 =A0

It's a limitation of=
many home routers that you can't use your externally routable IP addre=
ss from within the LAN.

--
Eric Covener
lank">covener@gmail.com

----------------------------------------=
-----------------------------
The official User-To-User support forum of=
the Apache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: arget=3D"_blank">users-unsubscribe@httpd.apache.org

=A0 " =A0 from the digest: httpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.o=
rg
For additional commands, e-mail: pd.apache.org" target=3D"_blank">users-help@httpd.apache.org

------------------------------------------------------------ -------=
--
The official User-To-User support forum of the Apache HTTP Server Pro=
ject.
See <URL: get=3D"_blank">http://httpd.apache.org/userslist.html> for more info=
..

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0 " =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

=A0
kquote>

------------------------------------------------------------ =
---------

The official User-To-User support forum of the Apache HTTP Server Project.<=
br>See <URL: "_blank">http://httpd.apache.org/userslist.html> for more info.
T=
o unsubscribe, e-mail: " target=3D"_blank">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: ttpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.or=
g
For additional commands, e-mail: d.apache.org" target=3D"_blank">users-help@httpd.apache.org

--0016364ecd80eea9c10469cc5b49--

Re: Fwd: Home Web Server
am 13.05.2009 16:58:51 von aw
Justin Zhang wrote:
> Thank you for the quick reply. How do I know which external IP address is
> right. I got 2 different address from myIPaddress with & without phone
> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
> ServerName 24.78.147.173:80

Justin,

there are 2 separate things :
- one is your Apache server, which runs on some machine (of a type we do
not know yet), but we do know that it has an internal IP address of
192.168.0.100, and we do know that, apparently, from some (other ?)
computer in your internal network, you can access this Apache server at
address 192.168.0.100.
More, we don't know, because you have not said.
But you got it running, so that is good.

- the second is your network configuration. Of that one, we know very
little, and it is a bit confusing when you talk about "with & without
phone router" and two different (apparently public) IP addresses.

Can you describe your configuration a bit better, like :
- what machine and OS is the Apache running on ?
- what version of Apache, and where did you get it ?
- do you have one, or two connections to the Internet ?
- what are you doing to try to access your webserver from the Internet ?
what machine are you using for that, and how is it connected to what ?
- is the machine where Apache is running the same as the machine where
you use your browser ? How many machines are there in your internal
network ?

Another important aspect : you give two "public" (Internet) IP addresses
above. Are these two IP addresses permanent (always the same), or do
they change every day, or when you reboot your Internet router ?

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 17:06:25 von Lester Caine
Justin Zhang wrote:
> Thank you for the quick reply. How do I know which external IP address
> is right. I got 2 different address from myIPaddress with & without
> phone router. 24.78.136.243 and 24.78.147.173. Is my configuration
> right? ServerName 24.78.147.173:80

Both addresses fail to provide web sites from this side ...
http://24.78.147.173 simply times out, but http://24.78.136.243/
probably has something attached as it says connection refused. So either
your router does not know how to pass the messages through. ( Mine has a
firewall that needs a port opening to allow the local web site out ) or
since I doubt that you have a static IP address, your ISP is blocking
things. Bare in mind that these numbers may well change when you
reconnect ...

--
Lester Caine - G8HFL
-----------------------------
Contact - http://lsces.co.uk/wiki/?page=contact
L.S.Caine Electronic Services - http://lsces.co.uk
EnquirySolve - http://enquirysolve.com/
Model Engineers Digital Workshop - http://medw.co.uk//
Firebird - http://www.firebirdsql.org/index.php

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 17:07:31 von Justin Zhang
--0016e64755aa0f528b0469cc92a1
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier wrote:

> Justin Zhang wrote:
>
>> Thank you for the quick reply. How do I know which external IP address i=
s
>> right. I got 2 different address from myIPaddress with & without phone
>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>> ServerName 24.78.147.173:80
>>
>
> Justin,
>
> there are 2 separate things :
> - one is your Apache server, which runs on some machine (of a type we do
> not know yet), but we do know that it has an internal IP address of
> 192.168.0.100, and we do know that, apparently, from some (other ?) compu=
ter
> in your internal network, you can access this Apache server at address
> 192.168.0.100.
> More, we don't know, because you have not said.
> But you got it running, so that is good.
>
> - the second is your network configuration. Of that one, we know very
> little, and it is a bit confusing when you talk about "with & without pho=
ne
> router" and two different (apparently public) IP addresses.
>
> Can you describe your configuration a bit better, like :
> - what machine and OS is the Apache running on ?

Windows XP

>
> - what version of Apache, and where did you get it ?

Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
apache_2.2.11-win32-x86-openssl-0.9.8i.msi a/apache/httpd/binaries/win32/apache_2.2.11-win32-x86-openss l-0.9.8i.msi>[
PGP -openssl-0.9.8i.msi.asc>]
[MD5 6-openssl-0.9.8i.msi.md5>]
from Apache.org

>
> - do you have one, or two connections to the Internet ?

I have one connection

>
> - what are you doing to try to access your webserver from the Internet ?
> what machine are you using for that, and how is it connected to what ?

just testing to browser the default installed page. I tried with another
computer in the network it can read internal address 192.168.0.100 but not
external one

>
> - is the machine where Apache is running the same as the machine where yo=
u
> use your browser ? How many machines are there in your internal network ?
> 2 one destop server and one laptop
> Another important aspect : you give two "public" (Internet) IP addresses
> above. Are these two IP addresses permanent (always the same), or do they
> change every day, or when you reboot your Internet router ?
> permanent i tried a few days
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e64755aa0f528b0469cc92a1
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier=
<&g=
t; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Thank you for the quick reply. H=
ow do I know which external IP address is
right. I got 2 different addre=
ss from myIPaddress with & without phone

router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
Serv=
erName 24.78.147.173:80=

Justin,

there are 2 separate things :=

- one is your Apache server, which runs on some machine (of a type we do no=
t know yet), but we do know that it has an internal IP address of 192.168.0=
..100, and we do know that, apparently, from some (other ?) computer in your=
internal network, you can access this Apache server at address 192.168.0.1=
00.

More, we don't know, because you have not said.
But you got it runni=
ng, so that is good.

- the second is your network configuration. =A0=
Of that one, we know very little, and it is a bit confusing when you talk a=
bout "with & without phone router" and two different (apparen=
tly public) IP addresses.

Can you describe your configuration a bit better, like :
- what mach=
ine and OS is the Apache running on ?

=A0

Windows XP

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
- what =
version of Apache, and where did you get it ?

Win32 Binary including OpenSSL 0.9.8i (MSI Installer): //mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win32/apa che_2.2.11-win3=
2-x86-openssl-0.9.8i.msi">apache_2.2.11-win32-x86-openssl-0. 9.8i.msi [<=
a href=3D"http://www.apache.org/dist/httpd/binaries/win32/apac he_2.2.11-win=
32-x86-openssl-0.9.8i.msi.asc">PGP] [ ist/httpd/binaries/win32/apache_2.2.11-win32-x86-openssl-0.9 .8i.msi.md5">MD=
5] from Apache.org

=A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
- do yo=
u have one, or two connections to the Internet ?

I have one connection

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
- what =
are you doing to try to access your webserver from the Internet ? what mach=
ine are you using for that, and how is it connected to what ?

just testing to browser the default installed page. I tried with anoth=
er computer in the network=A0it can read internal address 192.168.0.100 but=
not external one

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
- is th=
e machine where Apache is running the same as the machine where you use you=
r browser ? How many machines are there in your internal network ?

2 one destop server and one laptop
Another important aspect : you give t=
wo "public" (Internet) IP addresses above. Are these two IP addre=
sses permanent (always the same), or do they change every day, or when you =
reboot your Internet router ?=20

permanent i tried a few days

-----------------=
----------------------------------------------------
The official User-T=
o-User support forum of the Apache HTTP Server Project.
See <URL: ref=3D"http://httpd.apache.org/userslist.html" target=3D"_blank">http://htt=
pd.apache.org/userslist.html> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016e64755aa0f528b0469cc92a1--

Re: Fwd: Home Web Server
am 13.05.2009 17:08:12 von Lester Caine
Justin Zhang wrote:
> Do you mean ipconfig? I got 192.168.0.100 for my server computer

That is a private IP address and is never used outside a site. You nned
to 'map' that to the internet side of your router - if it can handle
such a thing.

--
Lester Caine - G8HFL
-----------------------------
Contact - http://lsces.co.uk/wiki/?page=contact
L.S.Caine Electronic Services - http://lsces.co.uk
EnquirySolve - http://enquirysolve.com/
Model Engineers Digital Workshop - http://medw.co.uk//
Firebird - http://www.firebirdsql.org/index.php

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 17:10:01 von Justin Zhang
--0016e646058cf981aa0469cc9a71
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

How to open a port to allow the local web site out?
Thanks

On Wed, May 13, 2009 at 8:06 AM, Lester Caine wrote:

> Justin Zhang wrote:
>
>> Thank you for the quick reply. How do I know which external IP address is
>> right. I got 2 different address from myIPaddress with & without phone
>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>> ServerName 24.78.147.173:80 <
>> http://24.78.147.173:80 >
>>
>
> Both addresses fail to provide web sites from this side ...
> http://24.78.147.173 simply times out, but http://24.78.136.243/ probably
> has something attached as it says connection refused. So either your router
> does not know how to pass the messages through. ( Mine has a firewall that
> needs a port opening to allow the local web site out ) or since I doubt that
> you have a static IP address, your ISP is blocking things. Bare in mind that
> these numbers may well change when you reconnect ...
>
> --
> Lester Caine - G8HFL
> -----------------------------
> Contact - http://lsces.co.uk/wiki/?page=contact
> L.S.Caine Electronic Services - http://lsces.co.uk
> EnquirySolve - http://enquirysolve.com/
> Model Engineers Digital Workshop - http://medw.co.uk//
> Firebird - http://www.firebirdsql.org/index.php
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e646058cf981aa0469cc9a71
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

How to open a port to allow the local web site out?

Thanks

=A0

=A0

On Wed, May 13, 2009 at 8:06 AM, Lester Caine pan dir=3D"ltr"><lester@lsces.co.u=
k> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Thank you for the quick reply. H=
ow do I know which external IP address is right. I got 2 different address =
from myIPaddress with & without phone router. 24.78.136.243 and 24.78.1=
47.173. Is my configuration right? ServerName 73/" target=3D"_blank">24.78.147.173:80 < ..173/" target=3D"_blank">http://24.78.147.173:80>

Both addresses fail to provide web sites from this side ..=
..
http://24.78.147.1=
73 simply times out, but lank">http://24.78.136.243/ probably has something attached as it says =
connection refused. So either your router does not know how to pass the mes=
sages through. ( Mine has a firewall that needs a port opening to allow the=
local web site out ) or since I doubt that you have a static IP address, y=
our ISP is blocking things. Bare in mind that these numbers may well change=
when you reconnect ...

--
Lester Caine - G8HFL
-----------------=
------------
Contact - t" target=3D"_blank">http://lsces.co.uk/wiki/?page=3Dcontact
L.S.Cai=
ne Electronic Services - =
http://lsces.co.uk

EnquirySolve - http:=
//enquirysolve.com/
Model Engineers Digital Workshop - tp://medw.co.uk//" target=3D"_blank">http://medw.co.uk//
Firebird - =
http://w=
ww.firebirdsql.org/index.php=20

-------------------------------------------------=
--------------------
The official User-To-User support forum of the Apac=
he HTTP Server Project.
See <URL: serslist.html" target=3D"_blank">http://httpd.apache.org/userslist.html=
> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016e646058cf981aa0469cc9a71--

Re: Fwd: Home Web Server
am 13.05.2009 17:11:52 von Justin Zhang
--0016e6464ee2a4205f0469cca154
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

I did already from DLink configuration page

On Wed, May 13, 2009 at 8:08 AM, Lester Caine wrote:

> Justin Zhang wrote:
>
>> Do you mean ipconfig? I got 192.168.0.100 for my server computer
>>
>
> That is a private IP address and is never used outside a site. You nned to
> 'map' that to the internet side of your router - if it can handle such a
> thing.
>
> --
> Lester Caine - G8HFL
> -----------------------------
> Contact - http://lsces.co.uk/wiki/?page=contact
> L.S.Caine Electronic Services - http://lsces.co.uk
> EnquirySolve - http://enquirysolve.com/
> Model Engineers Digital Workshop - http://medw.co.uk//
> Firebird - http://www.firebirdsql.org/index.php
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server
> Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6464ee2a4205f0469cca154
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I did already from DLink configuration page

On Wed, May 13, 2009 at 8:08 AM, Lester Caine pan dir=3D"ltr"><lester@lsces.co.u=
k> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Do you mean ipconfig? I got 192.=
168.0.100 for my server computer

That is a privat=
e IP address and is never used outside a site. You nned to 'map' th=
at to the internet side of your router - if it can handle such a thing.

--

Lester Caine - G8HFL
-----------------------------
=
Contact - ank">http://lsces.co.uk/wiki/?page=3Dcontact
L.S.Caine Electronic Se=
rvices - http://lsces.co.=
uk

EnquirySolve - http:=
//enquirysolve.com/
Model Engineers Digital Workshop - tp://medw.co.uk//" target=3D"_blank">http://medw.co.uk//
Firebird - =
http://w=
ww.firebirdsql.org/index.php

------------------------------------------------------------ --------- r>

The official User-To-User support forum of the Apache HTT=
P Server Project.
See <URL: st.html" target=3D"_blank">http://httpd.apache.org/userslist.html> f=
or more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016e6464ee2a4205f0469cca154--

Re: Fwd: Home Web Server
am 13.05.2009 17:18:35 von mwood
--FLPM4o+7JoHGki3m
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Wed, May 13, 2009 at 08:10:01AM -0700, Justin Zhang wrote:
> How to open a port to allow the local web site out?

Consult the instructions that came with your router. Every one of
them is different.

--=20
Mark H. Wood, Lead System Programmer mwood@IUPUI.Edu
Friends don't let friends publish revisable-form documents.

--FLPM4o+7JoHGki3m
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

iEYEARECAAYFAkoK5MsACgkQs/NR4JuTKG8GfQCfdpygIFhDk++xXW+x4uhL BHSt
rKAAoJIMxqB0l2mV4BJOTiBlwktzcwW5
=X0Kx
-----END PGP SIGNATURE-----

--FLPM4o+7JoHGki3m--

Re: Fwd: Home Web Server
am 13.05.2009 17:19:34 von Frank Gingras
Justin,

See: www.portforward.com

Frank

Justin Zhang wrote:
> How to open a port to allow the local web site out?
> Thanks
>
>
>
>
> On Wed, May 13, 2009 at 8:06 AM, Lester Caine wrote:
>
>
>> Justin Zhang wrote:
>>
>>
>>> Thank you for the quick reply. How do I know which external IP address is
>>> right. I got 2 different address from myIPaddress with & without phone
>>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>>> ServerName 24.78.147.173:80 <
>>> http://24.78.147.173:80 >
>>>
>>>
>> Both addresses fail to provide web sites from this side ...
>> http://24.78.147.173 simply times out, but http://24.78.136.243/ probably
>> has something attached as it says connection refused. So either your router
>> does not know how to pass the messages through. ( Mine has a firewall that
>> needs a port opening to allow the local web site out ) or since I doubt that
>> you have a static IP address, your ISP is blocking things. Bare in mind that
>> these numbers may well change when you reconnect ...
>>
>> --
>> Lester Caine - G8HFL
>> -----------------------------
>> Contact - http://lsces.co.uk/wiki/?page=contact
>> L.S.Caine Electronic Services - http://lsces.co.uk
>> EnquirySolve - http://enquirysolve.com/
>> Model Engineers Digital Workshop - http://medw.co.uk//
>> Firebird - http://www.firebirdsql.org/index.php
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>>
>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 17:24:58 von aw
Hi.

We are making some progress.

First thing to try : turn off your router, wait 30 sec, turn it back on.
Do you still have the same external IP address ?

Second thing to try : when you are sure that you still have the same
external IP address (or it has changed, and then tell us), you should
really try to access this IP address from the outside.
You cannot do that from inside your own network, if you have only one
internet connection. We can try it for you, after you turn off/on your
router and verify its address again.

The problem is probably that your router (who is the one that has this
external IP address), does not know that when some external computer
tries to contact it on port 80, it should pass on this call to your
internal webserver. So it tries to answer itself, but itself has no
webserver active on port 80.

Justin Zhang wrote:
> On Wed, May 13, 2009 at 7:58 AM, André Warnier wrote:
>
>> Justin Zhang wrote:
>>
>>> Thank you for the quick reply. How do I know which external IP address is
>>> right. I got 2 different address from myIPaddress with & without phone
>>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>>> ServerName 24.78.147.173:80
>>>
>> Justin,
>>
>> there are 2 separate things :
>> - one is your Apache server, which runs on some machine (of a type we do
>> not know yet), but we do know that it has an internal IP address of
>> 192.168.0.100, and we do know that, apparently, from some (other ?) computer
>> in your internal network, you can access this Apache server at address
>> 192.168.0.100.
>> More, we don't know, because you have not said.
>> But you got it running, so that is good.
>>
>> - the second is your network configuration. Of that one, we know very
>> little, and it is a bit confusing when you talk about "with & without phone
>> router" and two different (apparently public) IP addresses.
>>
>> Can you describe your configuration a bit better, like :
>> - what machine and OS is the Apache running on ?
>
>
> Windows XP
>
>> - what version of Apache, and where did you get it ?
>
> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
> apache_2.2.11-win32-x86-openssl-0.9.8i.msi[
> PGP]
> [MD5]
> from Apache.org
>
>
>
>> - do you have one, or two connections to the Internet ?
>
> I have one connection
>
>> - what are you doing to try to access your webserver from the Internet ?
>> what machine are you using for that, and how is it connected to what ?
>
> just testing to browser the default installed page. I tried with another
> computer in the network it can read internal address 192.168.0.100 but not
> external one
>
>> - is the machine where Apache is running the same as the machine where you
>> use your browser ? How many machines are there in your internal network ?
>> 2 one destop server and one laptop
>> Another important aspect : you give two "public" (Internet) IP addresses
>> above. Are these two IP addresses permanent (always the same), or do they
>> change every day, or when you reboot your Internet router ?
>> permanent i tried a few days
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 18:32:57 von lists
Justin Zhang wrote:
> My apache web server is connected as the diagram through DLink router,Phone
> adapter and Shaw cable modem.
>
> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>
> Question, I can brower my web site by http://192.168.0.100/ within local
> network. How can I browse my web site from computer over internet? I check
> my IP address from myIPaddress and get

It's Shaw, they block port 80, change the Apache conf to have Apache use
8080

had that problem with shaw myself.

and email from a remote server you need to change the port for that
also, add one to the default.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 19:36:07 von Justin Zhang
--0016364272b583cbfa0469cea57e
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Is my cofiguration right?

Listen 192.168.0.100:80
ServerName 24.78.136.243:80

On Wed, May 13, 2009 at 9:32 AM, J. Greenlees wrote:

> Justin Zhang wrote:
> > My apache web server is connected as the diagram through DLink
> router,Phone
> > adapter and Shaw cable modem.
> >
> > http://en.wikipedia.org/wiki/File:Voip-typical.gif
> >
> > Question, I can brower my web site by http://192.168.0.100/ within local
> > network. How can I browse my web site from computer over internet? I
> check
> > my IP address from myIPaddress and get
>
> It's Shaw, they block port 80, change the Apache conf to have Apache use
> 8080
>
> had that problem with shaw myself.
>
> and email from a remote server you need to change the port for that
> also, add one to the default.
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016364272b583cbfa0469cea57e
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Is my cofiguration right?

=A0

Listen
Ser=
verName

iv>

On Wed, May 13, 2009 at 9:32 AM, J. Greenlees pan dir=3D"ltr"><lists@jaqu=
i-greenlees.net> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:
> My apache web server is conne=
cted as the diagram through DLink router,Phone
> adapter and Shaw cab=
le modem.
>
> -typical.gif" target=3D"_blank">http://en.wikipedia.org/wiki/File:Voip-typ i=
cal.gif

>
> Question, I can brower my web site by 8.0.100/" target=3D"_blank">http://192.168.0.100/ within local
> =
network. How can I browse my web site from computer over internet? I check<=
br>
> my IP address from myIPaddress and get

It's Shaw, the=
y block port 80, change the Apache conf to have Apache use
8080

h=
ad that problem with shaw myself.

and email from a remote server you=
need to change the port for that

also, add one to the default.

-----------------------------------------------------=
----------------
The official User-To-User support forum of the Apache H=
TTP Server Project.
See <URL: list.html" target=3D"_blank">http://httpd.apache.org/userslist.html>=
for more info.

To unsubscribe, e-mail: g">users-unsubscribe@httpd.apache.org
=A0 " =A0 from the digest=
: users-digest=
-unsubscribe@httpd.apache.org

For additional commands, e-mail: org">users-help@httpd.apache.org

=

--0016364272b583cbfa0469cea57e--

Re: Fwd: Home Web Server
am 13.05.2009 19:47:01 von Frank Gingras
Justin,

1) You should not use the port in the ServerName

2) those directives will not fix the original issue, as outlined in
this thread. Did you have to a chance to read www.portforward.com?

Frank

On Wed, May 13, 2009 at 1:36 PM, Justin Zhang w=
rote:
> Is my cofiguration right?
>
> Listen 192.168.0.100:80
> ServerName 24.78.136.243:80
>
> On Wed, May 13, 2009 at 9:32 AM, J. Greenlees
> wrote:
>>
>> Justin Zhang wrote:
>> > My apache web server is connected as the diagram through DLink
>> > router,Phone
>> > adapter and Shaw cable modem.
>> >
>> > http://en.wikipedia.org/wiki/File:Voip-typical.gif
>> >
>> > Question, I can brower my web site by http://192.168.0.100/ within loc=
al
>> > network. How can I browse my web site from computer over internet? I
>> > check
>> > my IP address from myIPaddress and get
>>
>> It's Shaw, they block port 80, change the Apache conf to have Apache use
>> 8080
>>
>> had that problem with shaw myself.
>>
>> and email from a remote server you need to change the port for that
>> also, add one to the default.
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Projec=
t.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> =A0 " =A0 from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 19:58:54 von Justin Zhang
--0016367f96f0f5f4da0469cef6d0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

It is fixed IP address

24.78.136.243
Could you help me test from your side?

Thanks,

On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier wrote:

> Hi.
>
> We are making some progress.
>
> First thing to try : turn off your router, wait 30 sec, turn it back on.
> Do you still have the same external IP address ?
>
> Second thing to try : when you are sure that you still have the same
> external IP address (or it has changed, and then tell us), you should rea=
lly
> try to access this IP address from the outside.
> You cannot do that from inside your own network, if you have only one
> internet connection. We can try it for you, after you turn off/on your
> router and verify its address again.
>
> The problem is probably that your router (who is the one that has this
> external IP address), does not know that when some external computer trie=
s
> to contact it on port 80, it should pass on this call to your internal
> webserver. So it tries to answer itself, but itself has no webserver act=
ive
> on port 80.
>
>
>
>
> Justin Zhang wrote:
>
>> On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier wrote:
>>
>> Justin Zhang wrote:
>>>
>>> Thank you for the quick reply. How do I know which external IP address
>>>> is
>>>> right. I got 2 different address from myIPaddress with & without phone
>>>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>>>> ServerName 24.78.147.173:80 <
>>>> http://24.78.147.173/>
>>>>
>>>> Justin,
>>>
>>> there are 2 separate things :
>>> - one is your Apache server, which runs on some machine (of a type we d=
o
>>> not know yet), but we do know that it has an internal IP address of
>>> 192.168.0.100, and we do know that, apparently, from some (other ?)
>>> computer
>>> in your internal network, you can access this Apache server at address
>>> 192.168.0.100.
>>> More, we don't know, because you have not said.
>>> But you got it running, so that is good.
>>>
>>> - the second is your network configuration. Of that one, we know very
>>> little, and it is a bit confusing when you talk about "with & without
>>> phone
>>> router" and two different (apparently public) IP addresses.
>>>
>>> Can you describe your configuration a bit better, like :
>>> - what machine and OS is the Apache running on ?
>>>
>>
>>
>> Windows XP
>>
>> - what version of Apache, and where did you get it ?
>>>
>>
>> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
>> apache_2.2.11-win32-x86-openssl-0.9.8i.msi<
>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_2.2=
..11-win32-x86-openssl-0.9.8i.msi
>> >[
>> PGP<
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.asc
>> >]
>> [MD5<
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.md5>]
>>
>>
>> from Apache.org
>>
>>
>>
>> - do you have one, or two connections to the Internet ?
>>>
>>
>> I have one connection
>>
>> - what are you doing to try to access your webserver from the Internet ?
>>> what machine are you using for that, and how is it connected to what ?
>>>
>>
>> just testing to browser the default installed page. I tried with another
>> computer in the network it can read internal address 192.168.0.100 but n=
ot
>> external one
>>
>> - is the machine where Apache is running the same as the machine where y=
ou
>>> use your browser ? How many machines are there in your internal network=
?
>>> 2 one destop server and one laptop
>>> Another important aspect : you give two "public" (Internet) IP addresse=
s
>>> above. Are these two IP addresses permanent (always the same), or do th=
ey
>>> change every day, or when you reboot your Internet router ?
>>> permanent i tried a few days
>>>
>>>
>>> ------------------------------------------------------------ ---------
>>> The official User-To-User support forum of the Apache HTTP Server
>>> Project.
>>> See for more info.
>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>
>>>
>>>
>>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016367f96f0f5f4da0469cef6d0
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

It is fixed IP address=20

24.78.136.243

Could you help me test from your side?

=A0

Thanks,

=A0

=A0

On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier=
<&g=
t; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi.

We are making some pr=
ogress.

First thing to try : turn off your router, wait 30 sec, turn=
it back on.

Do you still have the same external IP address ?

Second thing to try=
: when you are sure that you still have the same external IP address (or i=
t has changed, and then tell us), you should really try to access this IP a=
ddress from the outside.

You cannot do that from inside your own network, if you have only one inter=
net connection. =A0We can try it for you, after you turn off/on your router=
and verify its address again.

The problem is probably that your rou=
ter (who is the one that has this external IP address), does not know that =
when some external computer tries to contact it on port 80, it should pass =
on this call to your internal webserver. =A0So it tries to answer itself, b=
ut itself has no webserver active on port 80.

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier < ref=3D"mailto:aw@ice-sa.com" target=3D"_blank">aw@ice-sa.com> wrote:=

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Thank you for the quick reply. How do I know which extern=
al IP address is
right. I got 2 different address from myIPaddress with =
& without phone
router. 24.78.136.243 and 24.78.147.173. Is my confi=
guration right?

ServerName lank">24.78.147.173:80 < _blank">http://24.78.147.173/>

Justin,

there are 2 separate things :
- one is =
your Apache server, which runs on some machine (of a type we do
not know=
yet), but we do know that it has an internal IP address of
192.168.0.10=
0, and we do know that, apparently, from some (other ?) computer

in your internal network, you can access this Apache server at address
1=
92.168.0.100.
More, we don't know, because you have not said.
But=
you got it running, so that is good.

- the second is your network c=
onfiguration. =A0Of that one, we know very

little, and it is a bit confusing when you talk about "with & with=
out phone
router" and two different (apparently public) IP addresse=
s.

Can you describe your configuration a bit better, like :
- wha=
t machine and OS is the Apache running on ?

Windows XP

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">- what version of Apache, and wh=
ere did you get it ?

=A0Win32 Binary including OpenSSL =
0.9.8i (MSI Installer):

apache_2.2.11-win32-x86-openssl-0.9.8i.msi< r.csclub.uwaterloo.ca/apache/httpd/binaries/win32/apache_2.2 .11-win32-x86-o=
penssl-0.9.8i.msi" target=3D"_blank">http://mirror.csclub.uwaterloo.ca/apac=
he/httpd/binaries/win32/apache_2.2.11-win32-x86-openssl-0.9. 8i.msi>[=

PGP< 2.11-win32-x86-openssl-0.9.8i.msi.asc" target=3D"_blank">http://www.apache.=
org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-openss l-0.9.8i.msi.as=
c>]

[MD5< ..2.11-win32-x86-openssl-0.9.8i.msi.md5" target=3D"_blank">http://www.apache=
..org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-open ssl-0.9.8i.msi.m=
d5>]=20

from Apache.org

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">- do you have one, or two connec=
tions to the Internet ?

I have one connection

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">- what are you doing to try to a=
ccess your webserver from the Internet ?
what machine are you using for =
that, and how is it connected to what ?

just testing to browser the default installed page. I trie=
d with another
computer in the network it can read internal address 192.=
168.0.100 but not
external one

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">- is the machine where Apache is=
running the same as the machine where you
use your browser ? How many m=
achines are there in your internal network ?

2 one destop server and one laptop
Another important aspect : you give t=
wo "public" (Internet) IP addresses
above. Are these two IP ad=
dresses permanent (always the same), or do they
change every day, or whe=
n you reboot your Internet router ?

permanent i tried a few days

-----------------------------------=
----------------------------------
The official User-To-User support for=
um of the Apache HTTP Server Project.
See <URL: d.apache.org/userslist.html" target=3D"_blank">http://httpd.apache.org/user=
slist.html> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

ote>

-------------------------------------------------=
--------------------
The official User-To-User support forum of the Apac=
he HTTP Server Project.
See <URL: serslist.html" target=3D"_blank">http://httpd.apache.org/userslist.html=
> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016367f96f0f5f4da0469cef6d0--

Re: Fwd: Home Web Server
am 13.05.2009 20:12:34 von Evan Platt
# telnet 24.78.136.243 80
Trying 24.78.136.243...
telnet: connect to address 24.78.136.243: Connection refused
telnet: Unable to connect to remote host

Did you change the port as J. Greenlees suggested?

At 10:58 AM 5/13/2009, you wrote:
>It is fixed IP address
>
>24.78.136.243
>Could you help me test from your side?
>
>Thanks,
>
>
>
>
>On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier=20
><aw@ice-sa.com> wrote:
>Hi.
>
>We are making some progress.
>
>First thing to try : turn off your router, wait 30 sec, turn it back on.
>Do you still have the same external IP address ?
>
>Second thing to try : when you are sure that you=20
>still have the same external IP address (or it=20
>has changed, and then tell us), you should=20
>really try to access this IP address from the outside.
>You cannot do that from inside your own network,=20
>if you have only one internet connection. We=20
>can try it for you, after you turn off/on your=20
>router and verify its address again.
>
>The problem is probably that your router (who is=20
>the one that has this external IP address), does=20
>not know that when some external computer tries=20
>to contact it on port 80, it should pass on this=20
>call to your internal webserver. So it tries to=20
>answer itself, but itself has no webserver active on port 80.
>
>
>
>
>Justin Zhang wrote:
>On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier=20
><aw@ice-sa.com> wrote:
>
>Justin Zhang wrote:
>
>Thank you for the quick reply. How do I know which external IP address is
>right. I got 2 different address from myIPaddress with & without phone
>router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>ServerName=20
>24.78.147.173:80=20
><http://24.78.147.173/>
>
>Justin,
>
>there are 2 separate things :
>- one is your Apache server, which runs on some machine (of a type we do
>not know yet), but we do know that it has an internal IP address of
>192.168.0.100, and we do know that, apparently, from some (other ?)=
computer
>in your internal network, you can access this Apache server at address
>192.168.0.100.
>More, we don't know, because you have not said.
>But you got it running, so that is good.
>
>- the second is your network configuration. Of that one, we know very
>little, and it is a bit confusing when you talk about "with & without phone
>router" and two different (apparently public) IP addresses.
>
>Can you describe your configuration a bit better, like :
>- what machine and OS is the Apache running on ?
>
>
>
>Windows XP
>
>- what version of Apache, and where did you get it ?
>
>
> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
>apache_2.2.11-win32-x86-openssl-0.9.8i.msi< ca/apache/httpd/binaries/win32/apache_2.2.11-win32-x86-opens sl-0.9.8i.msi>ht=
tp://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win32/ apache_2.2.11-wi=
n32-x86-openssl-0.9.8i.msi>[
>PGP< 6-openssl-0.9.8i.msi.asc>http://www.apache.org/dist/httpd/bi naries/win32/apa=
che_2.2.11-win32-x86-openssl-0.9.8i.msi.asc>]
>[MD5< 86-openssl-0.9.8i.msi.md5>http://www.apache.org/dist/httpd/b inaries/win32/ap=
ache_2.2.11-win32-x86-openssl-0.9.8i.msi.md5>]=20
>
>
>from Apache.org
>
>
>
>- do you have one, or two connections to the Internet ?
>
>
>I have one connection
>
>- what are you doing to try to access your webserver from the Internet ?
>what machine are you using for that, and how is it connected to what ?
>
>
>just testing to browser the default installed page. I tried with another
>computer in the network it can read internal address 192.168.0.100 but not
>external one
>
>- is the machine where Apache is running the same as the machine where you
>use your browser ? How many machines are there in your internal network ?
>2 one destop server and one laptop
>Another important aspect : you give two "public" (Internet) IP addresses
>above. Are these two IP addresses permanent (always the same), or do they
>change every day, or when you reboot your Internet router ?
>permanent i tried a few days
>
>
>----------------------------------------------------------- ----------
>The official User-To-User support forum of the Apache HTTP Server Project.
>See for more info.
>To unsubscribe, e-mail:=20
>users-unsubscribe@httpd.apache.o=
rg
> " from the digest:=20
>=
users-digest-unsubscribe@=
httpd.apache.org
>For additional commands, e-mail:=20
>users-help@httpd.apache.org
>
>
>
>
>
>----------------------------------------------------------- ----------
>The official User-To-User support forum of the Apache HTTP Server Project.
>See for more info.
>To unsubscribe, e-mail:=20
>users-unsubscribe@httpd.apache.o=
rg
> " from the digest:=20
>=
users-digest-unsubscribe@=
httpd.apache.org
>For additional commands, e-mail:=20
>users-help@httpd.apache.org
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 20:26:26 von Justin Zhang
--0016e6464ee273f44d0469cf5986
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I am not sure where to change the port

I tried to change Listen 192.168.0.100:80 --> 192.168.0.100:8080. Even
internal IP is not working.

On Wed, May 13, 2009 at 11:12 AM, Evan Platt wrote=
:

> # telnet 24.78.136.243 80
> Trying 24.78.136.243...
> telnet: connect to address 24.78.136.243: Connection refused
> telnet: Unable to connect to remote host
>
> Did you change the port as J. Greenlees suggested?
>
>
> At 10:58 AM 5/13/2009, you wrote:
>
>> It is fixed IP address
>>
>> 24.78.136.243
>> Could you help me test from your side?
>>
>> Thanks,
>>
>>
>>
>>
>> On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier <
>> aw@ice-sa.com> wrote:
>> Hi.
>>
>> We are making some progress.
>>
>> First thing to try : turn off your router, wait 30 sec, turn it back on.
>> Do you still have the same external IP address ?
>>
>> Second thing to try : when you are sure that you still have the same
>> external IP address (or it has changed, and then tell us), you should re=
ally
>> try to access this IP address from the outside.
>> You cannot do that from inside your own network, if you have only one
>> internet connection. We can try it for you, after you turn off/on your
>> router and verify its address again.
>>
>> The problem is probably that your router (who is the one that has this
>> external IP address), does not know that when some external computer tri=
es
>> to contact it on port 80, it should pass on this call to your internal
>> webserver. So it tries to answer itself, but itself has no webserver ac=
tive
>> on port 80.
>>
>>
>>
>>
>> Justin Zhang wrote:
>> On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier <
>> aw@ice-sa.com> wrote:
>>
>> Justin Zhang wrote:
>>
>> Thank you for the quick reply. How do I know which external IP address i=
s
>> right. I got 2 different address from myIPaddress with & without phone
>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>> ServerName 24.78.147.173:80 ><<
>> http://24.78.147.173/>http://24.78.147.173/>
>>
>> Justin,
>>
>> there are 2 separate things :
>> - one is your Apache server, which runs on some machine (of a type we do
>> not know yet), but we do know that it has an internal IP address of
>> 192.168.0.100, and we do know that, apparently, from some (other ?)
>> computer
>> in your internal network, you can access this Apache server at address
>> 192.168.0.100.
>> More, we don't know, because you have not said.
>> But you got it running, so that is good.
>>
>> - the second is your network configuration. Of that one, we know very
>> little, and it is a bit confusing when you talk about "with & without
>> phone
>> router" and two different (apparently public) IP addresses.
>>
>> Can you describe your configuration a bit better, like :
>> - what machine and OS is the Apache running on ?
>>
>>
>>
>> Windows XP
>>
>> - what version of Apache, and where did you get it ?
>>
>>
>> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
>> apache_2.2.11-win32-x86-openssl-0.9.8i.msi<<
>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_2.2=
..11-win32-x86-openssl-0.9.8i.msi
>> >
>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_2.2=
..11-win32-x86-openssl-0.9.8i.msi
>> >[
>> PGP<<
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.asc
>> >
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.asc
>> >]
>> [MD5<<
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.md5
>> >
>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x86-=
openssl-0.9.8i.msi.md5>]
>>
>>
>> from Apache.org
>>
>>
>>
>> - do you have one, or two connections to the Internet ?
>>
>>
>> I have one connection
>>
>> - what are you doing to try to access your webserver from the Internet ?
>> what machine are you using for that, and how is it connected to what ?
>>
>>
>> just testing to browser the default installed page. I tried with another
>> computer in the network it can read internal address 192.168.0.100 but n=
ot
>> external one
>>
>> - is the machine where Apache is running the same as the machine where y=
ou
>> use your browser ? How many machines are there in your internal network =
?
>> 2 one destop server and one laptop
>> Another important aspect : you give two "public" (Internet) IP addresses
>> above. Are these two IP addresses permanent (always the same), or do the=
y
>> change every day, or when you reboot your Internet router ?
>> permanent i tried a few days
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Projec=
t.
>> See for more info.
>> To unsubscribe, e-mail:
>> users-unsubscribe@httpd.apache.org
>> " from the digest:
>> users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail:
>> users-help@httpd.apache.org
>>
>>
>>
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Projec=
t.
>> See for more info.
>> To unsubscribe, e-mail:
>> users-unsubscribe@httpd.apache.org
>> " from the digest:
>> users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail:
>> users-help@httpd.apache.org
>>
>>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6464ee273f44d0469cf5986
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I am not sure where to change the port

=A0

I tried to change Listen 192.168.0=
..100:80 --> 192.168.0.100:8080=
. Even internal IP is not working.

=A0

=A0

On Wed, May 13, 2009 at 11:12 AM, Evan Platt an dir=3D"ltr"><evan@espphoto=
graphy.com> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"># telnet 24.78.136.243 =A080
=
Trying 24.78.136.243...
telnet: connect to address 78.136.243/" target=3D"_blank">24.78.136.243: Connection refused

telnet: Unable to connect to remote host

Did you change the port as =
J. Greenlees suggested?=20

At 10:58 AM 5/13/2009, you wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

It is fixed IP address

24.78.136.243
Could you =
help me test from your side?

Thanks,

On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier <<=
mailto:=
>>=
; wrote:

Hi.

We are making some progress.

First thing to try : turn of=
f your router, wait 30 sec, turn it back on.
Do you still have the same =
external IP address ?

Second thing to try : when you are sure that y=
ou still have the same external IP address (or it has changed, and then tel=
l us), you should really try to access this IP address from the outside.<=
br>
You cannot do that from inside your own network, if you have only one inter=
net connection. =A0We can try it for you, after you turn off/on your router=
and verify its address again.

The problem is probably that your rou=
ter (who is the one that has this external IP address), does not know that =
when some external computer tries to contact it on port 80, it should pass =
on this call to your internal webserver. =A0So it tries to answer itself, b=
ut itself has no webserver active on port 80.

Justin Zhang wrote:

On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier <<=
mailto:=
>>=
; wrote:

Justin Zhang wrote:

Thank you for the quick reply. How do I know=
which external IP address is
right. I got 2 different address from myIP=
address with & without phone
router. 24.78.136.243 and 24.78.147.173=
.. Is my configuration right?

ServerName <ht=
tp://24.78.147.173/> nk">24.78.147.173:80 << =3D"_blank">http://24.78.147.173/> target=3D"_blank">http://24.78.147.173/>=20

Justin,

there are 2 separate things :
-=
one is your Apache server, which runs on some machine (of a type we do
=
not know yet), but we do know that it has an internal IP address of
192.=
168.0.100, and we do know that, apparently, from some (other ?) computer >
in your internal network, you can access this Apache server at address
1=
92.168.0.100.
More, we don't know, because you have not said.
But=
you got it running, so that is good.

- the second is your network c=
onfiguration. =A0Of that one, we know very

little, and it is a bit confusing when you talk about "with & with=
out phone
router" and two different (apparently public) IP addresse=
s.

Can you describe your configuration a bit better, like :
- wha=
t machine and OS is the Apache running on ?

Windows XP

- what version of Apache, and where did you g=
et it ?

=A0Win32 Binary including OpenSSL 0.9.8i (MSI Installer)=
:
apache_2.2.11-win32-x86-openssl-0.9.8i.msi<< p://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win32/a pache_2.2.11-wi=
n32-x86-openssl-0.9.8i.msi" target=3D"_blank">http://mirror.csclub.uwaterlo=
o.ca/apache/httpd/binaries/win32/apache_2.2.11-win32-x86-ope nssl-0.9.8i.msi=
> win32/apache_2.2.11-win32-x86-openssl-0.9.8i.msi" target=3D"_blank">http://=
mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win32/apach e_2.2.11-win32-=
x86-openssl-0.9.8i.msi>[

PGP<< e_2.2.11-win32-x86-openssl-0.9.8i.msi.asc" target=3D"_blank">http://www.apa=
che.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-op enssl-0.9.8i.ms=
i.asc> che_2.2.11-win32-x86-openssl-0.9.8i.msi.asc" target=3D"_blank">http://www.a=
pache.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86- openssl-0.9.8i.=
msi.asc>]

[MD5<< he_2.2.11-win32-x86-openssl-0.9.8i.msi.md5" target=3D"_blank">http://www.ap=
ache.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-o penssl-0.9.8i.m=
si.md5> ache_2.2.11-win32-x86-openssl-0.9.8i.msi.md5" target=3D"_blank">http://www.=
apache.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86 -openssl-0.9.8i=
..msi.md5>]

from Apache.org

- do you have one, or =
two connections to the Internet ?

I have one connection

-=
what are you doing to try to access your webserver from the Internet ?

what machine are you using for that, and how is it connected to what ?
<=
br>
just testing to browser the default installed page. I tried with ano=
ther
computer in the network it can read internal address 192.168.0.100 =
but not

external one

- is the machine where Apache is running the same as th=
e machine where you
use your browser ? How many machines are there in yo=
ur internal network ?
2 one destop server and one laptop
Another impo=
rtant aspect : you give two "public" (Internet) IP addresses

above. Are these two IP addresses permanent (always the same), or do they r>change every day, or when you reboot your Internet router ?
permanent =
i tried a few days

---------------------------------------------=
------------------------

The official User-To-User support forum of the Apache HTTP Server Project.<=
br>See <URL: "_blank">http://httpd.apache.org/userslist.html> for more info.
<=
/div>
To unsubscribe, e-mail: <mailto: d.apache.org" target=3D"_blank">users-unsubscribe@httpd.apache.org><=
a href=3D"mailto:users-unsubscribe@httpd.apache.org" target=3D"_blank">user=
s-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: <mailto: subscribe@httpd.apache.org" target=3D"_blank">users-digest-unsubscribe@http=
d.apache.org> ..org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: <mailto: tpd.apache.org" target=3D"_blank">users-help@httpd.apache.org> f=3D"mailto:users-help@httpd.apache.org" target=3D"_blank">users-help@httpd=
..apache.org=20

---------------------------------=
------------------------------------
The official User-To-User support f=
orum of the Apache HTTP Server Project.
See <URL: tpd.apache.org/userslist.html" target=3D"_blank">http://httpd.apache.org/us=
erslist.html> for more info.

To unsubscribe, e-mail: <mailto: e@httpd.apache.org" target=3D"_blank">users-unsubscribe@httpd.apache.org >> ">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: <mailto: subscribe@httpd.apache.org" target=3D"_blank">users-digest-unsubscribe@http=
d.apache.org> ..org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: <mailto: tpd.apache.org" target=3D"_blank">users-help@httpd.apache.org> f=3D"mailto:users-help@httpd.apache.org" target=3D"_blank">users-help@httpd=
..apache.org

-------------------------------------------------=
--------------------
The official User-To-User support forum of the Apac=
he HTTP Server Project.
See <URL: serslist.html" target=3D"_blank">http://httpd.apache.org/userslist.html=
> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016e6464ee273f44d0469cf5986--

Re: Fwd: Home Web Server
am 13.05.2009 20:28:42 von Frank Gingras
Justin,

You'll need to use http://192.168.0.100:8080 from your internal=20
machines, after you restarted httpd.

Frank.

Justin Zhang wrote:
> I am not sure where to change the port
>
> I tried to change Listen 192.168.0.100:80 --> 192.168.0.100:8080. Even
> internal IP is not working.
>
>
>
>
> On Wed, May 13, 2009 at 11:12 AM, Evan Platt w=
rote:
>
> =20
>> # telnet 24.78.136.243 80
>> Trying 24.78.136.243...
>> telnet: connect to address 24.78.136.243: Connection refused
>> telnet: Unable to connect to remote host
>>
>> Did you change the port as J. Greenlees suggested?
>>
>>
>> At 10:58 AM 5/13/2009, you wrote:
>>
>> =20
>>> It is fixed IP address
>>>
>>> 24.78.136.243
>>> Could you help me test from your side?
>>>
>>> Thanks,
>>>
>>>
>>>
>>>
>>> On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier < om>
>>> aw@ice-sa.com> wrote:
>>> Hi.
>>>
>>> We are making some progress.
>>>
>>> First thing to try : turn off your router, wait 30 sec, turn it back =
on.
>>> Do you still have the same external IP address ?
>>>
>>> Second thing to try : when you are sure that you still have the same
>>> external IP address (or it has changed, and then tell us), you should=
really
>>> try to access this IP address from the outside.
>>> You cannot do that from inside your own network, if you have only one=

>>> internet connection. We can try it for you, after you turn off/on yo=
ur
>>> router and verify its address again.
>>>
>>> The problem is probably that your router (who is the one that has thi=
s
>>> external IP address), does not know that when some external computer =
tries
>>> to contact it on port 80, it should pass on this call to your interna=
l
>>> webserver. So it tries to answer itself, but itself has no webserver=
active
>>> on port 80.
>>>
>>>
>>>
>>>
>>> Justin Zhang wrote:
>>> On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier < om>
>>> aw@ice-sa.com> wrote:
>>>
>>> Justin Zhang wrote:
>>>
>>> Thank you for the quick reply. How do I know which external IP addres=
s is
>>> right. I got 2 different address from myIPaddress with & without phon=
e
>>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>>> ServerName 24.78.147.173:80 73/><<
>>> http://24.78.147.173/>http://24.78.147.173/>
>>>
>>> Justin,
>>>
>>> there are 2 separate things :
>>> - one is your Apache server, which runs on some machine (of a type we=
do
>>> not know yet), but we do know that it has an internal IP address of
>>> 192.168.0.100, and we do know that, apparently, from some (other ?)
>>> computer
>>> in your internal network, you can access this Apache server at addres=
s
>>> 192.168.0.100.
>>> More, we don't know, because you have not said.
>>> But you got it running, so that is good.
>>>
>>> - the second is your network configuration. Of that one, we know ver=
y
>>> little, and it is a bit confusing when you talk about "with & without=

>>> phone
>>> router" and two different (apparently public) IP addresses.
>>>
>>> Can you describe your configuration a bit better, like :
>>> - what machine and OS is the Apache running on ?
>>>
>>>
>>>
>>> Windows XP
>>>
>>> - what version of Apache, and where did you get it ?
>>>
>>>
>>> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
>>> apache_2.2.11-win32-x86-openssl-0.9.8i.msi<<
>>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_=
2.2.11-win32-x86-openssl-0.9.8i.msi
>>> =20
>>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_=
2.2.11-win32-x86-openssl-0.9.8i.msi
>>> =20
>>>> [
>>>> =20
>>> PGP<<
>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x=
86-openssl-0.9.8i.msi.asc
>>> =20
>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x=
86-openssl-0.9.8i.msi.asc
>>> =20
>>>> ]
>>>> =20
>>> [MD5<<
>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x=
86-openssl-0.9.8i.msi.md5
>>> =20
>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x=
86-openssl-0.9.8i.msi.md5>]
>>>
>>>
>>> from Apache.org
>>>
>>>
>>>
>>> - do you have one, or two connections to the Internet ?
>>>
>>>
>>> I have one connection
>>>
>>> - what are you doing to try to access your webserver from the Interne=
t ?
>>> what machine are you using for that, and how is it connected to what =
?
>>>
>>>
>>> just testing to browser the default installed page. I tried with anot=
her
>>> computer in the network it can read internal address 192.168.0.100 bu=
t not
>>> external one
>>>
>>> - is the machine where Apache is running the same as the machine wher=
e you
>>> use your browser ? How many machines are there in your internal netwo=
rk ?
>>> 2 one destop server and one laptop
>>> Another important aspect : you give two "public" (Internet) IP addres=
ses
>>> above. Are these two IP addresses permanent (always the same), or do =
they
>>> change every day, or when you reboot your Internet router ?
>>> permanent i tried a few days
>>>
>>>
>>> ------------------------------------------------------------ ---------=

>>> The official User-To-User support forum of the Apache HTTP Server Pro=
ject.
>>> See for more info.
>>> To unsubscribe, e-mail:
>>> users-unsubscribe@httpd.apache.org
>>> " from the digest: rg>
>>> users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: =

>>> users-help@httpd.apache.org
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------ ---------=

>>> The official User-To-User support forum of the Apache HTTP Server Pro=
ject.
>>> See for more info.
>>> To unsubscribe, e-mail:
>>> users-unsubscribe@httpd.apache.org
>>> " from the digest: rg>
>>> users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: =

>>> users-help@httpd.apache.org
>>>
>>>
>>> =20
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Proj=
ect.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>> =20
>
> =20

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 20:33:18 von aw
Justin Zhang wrote:
> Is my cofiguration right?
>
> Listen 192.168.0.100:80
> ServerName 24.78.136.243:80
>
Not entirely. Simplify :
Listen 80
ServerName 24.78.136.243

Some tips :
- do not make changes to the configuration unless you know exactly why
you are making them, and what you are doing.
- make one single change at a time, restart Apache, and check that it
still works like it did before.
- do not make changes in-between messages that you post here, or else
you will upset the people trying to help you, and they will not answer
anymore

You have a basically working Apache now. Do not ruin it, or else it is
going to be very hard to fix what does not work yet.
So far, your problem does not seem to be with Apache, but with the
network outside of Apache.

Now about the change I recommended above, and why :

Listen 192.168.0.100:80
is unnecessarily restrictive. It means that your Apache will only
process requests that arrive on its interface that has the IP address
"192.168.0.100". So it would not process request that arrive on is
interface 127.0.0.1 (the loopback interface).
Listen 80
means : process all requests arriving for port 80, no matter through
which interface they arrive.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 20:35:18 von Justin Zhang
--00163646d5c424394f0469cf7914
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

http://192.168.0.100:8080 is working for me now. Could you help try my
external IP

24.78.136.243
Thanks,

On Wed, May 13, 2009 at 11:28 AM, Frank Gingras
wrote:

> Justin,
>
> You'll need to use http://192.168.0.100:8080 from your internal machines,
> after you restarted httpd.
>
> Frank.
>
>
> Justin Zhang wrote:
>
>> I am not sure where to change the port
>>
>> I tried to change Listen 192.168.0.100:80 -->
>> 192.168.0.100:8080. Even
>> internal IP is not working.
>>
>>
>>
>>
>> On Wed, May 13, 2009 at 11:12 AM, Evan Platt >> >wrote:
>>
>>
>>
>>> # telnet 24.78.136.243 80
>>> Trying 24.78.136.243...
>>> telnet: connect to address 24.78.136.243: Connection refused
>>> telnet: Unable to connect to remote host
>>>
>>> Did you change the port as J. Greenlees suggested?
>>>
>>>
>>> At 10:58 AM 5/13/2009, you wrote:
>>>
>>>
>>>
>>>> It is fixed IP address
>>>>
>>>> 24.78.136.243
>>>> Could you help me test from your side?
>>>>
>>>> Thanks,
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier < m>
>>>> aw@ice-sa.com> wrote:
>>>> Hi.
>>>>
>>>> We are making some progress.
>>>>
>>>> First thing to try : turn off your router, wait 30 sec, turn it back o=
n.
>>>> Do you still have the same external IP address ?
>>>>
>>>> Second thing to try : when you are sure that you still have the same
>>>> external IP address (or it has changed, and then tell us), you should
>>>> really
>>>> try to access this IP address from the outside.
>>>> You cannot do that from inside your own network, if you have only one
>>>> internet connection. We can try it for you, after you turn off/on you=
r
>>>> router and verify its address again.
>>>>
>>>> The problem is probably that your router (who is the one that has this
>>>> external IP address), does not know that when some external computer
>>>> tries
>>>> to contact it on port 80, it should pass on this call to your internal
>>>> webserver. So it tries to answer itself, but itself has no webserver
>>>> active
>>>> on port 80.
>>>>
>>>>
>>>>
>>>>
>>>> Justin Zhang wrote:
>>>> On Wed, May 13, 2009 at 7:58 AM, Andr=E9 Warnier < m>
>>>> aw@ice-sa.com> wrote:
>>>>
>>>> Justin Zhang wrote:
>>>>
>>>> Thank you for the quick reply. How do I know which external IP address
>>>> is
>>>> right. I got 2 different address from myIPaddress with & without phone
>>>> router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
>>>> ServerName 24.78.147.173:80 3/>
>>>> <<
>>>> http://24.78.147.173/>http://24.78.147.173/>
>>>>
>>>> Justin,
>>>>
>>>> there are 2 separate things :
>>>> - one is your Apache server, which runs on some machine (of a type we =
do
>>>> not know yet), but we do know that it has an internal IP address of
>>>> 192.168.0.100, and we do know that, apparently, from some (other ?)
>>>> computer
>>>> in your internal network, you can access this Apache server at address
>>>> 192.168.0.100.
>>>> More, we don't know, because you have not said.
>>>> But you got it running, so that is good.
>>>>
>>>> - the second is your network configuration. Of that one, we know very
>>>> little, and it is a bit confusing when you talk about "with & without
>>>> phone
>>>> router" and two different (apparently public) IP addresses.
>>>>
>>>> Can you describe your configuration a bit better, like :
>>>> - what machine and OS is the Apache running on ?
>>>>
>>>>
>>>>
>>>> Windows XP
>>>>
>>>> - what version of Apache, and where did you get it ?
>>>>
>>>>
>>>> Win32 Binary including OpenSSL 0.9.8i (MSI Installer):
>>>> apache_2.2.11-win32-x86-openssl-0.9.8i.msi<<
>>>>
>>>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_2=
..2.11-win32-x86-openssl-0.9.8i.msi
>>>>
>>>> http://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win3 2/apache_2=
..2.11-win32-x86-openssl-0.9.8i.msi
>>>>
>>>>
>>>>> [
>>>>>
>>>>>
>>>> PGP<<
>>>>
>>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x8=
6-openssl-0.9.8i.msi.asc
>>>>
>>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x8=
6-openssl-0.9.8i.msi.asc
>>>>
>>>>
>>>>> ]
>>>>>
>>>>>
>>>> [MD5<<
>>>>
>>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x8=
6-openssl-0.9.8i.msi.md5
>>>>
>>>> http://www.apache.org/dist/httpd/binaries/win32/apache_2.2.1 1-win32-x8=
6-openssl-0.9.8i.msi.md5
>>>> >]
>>>>
>>>>
>>>> from Apache.org
>>>>
>>>>
>>>>
>>>> - do you have one, or two connections to the Internet ?
>>>>
>>>>
>>>> I have one connection
>>>>
>>>> - what are you doing to try to access your webserver from the Internet=
?
>>>> what machine are you using for that, and how is it connected to what ?
>>>>
>>>>
>>>> just testing to browser the default installed page. I tried with anoth=
er
>>>> computer in the network it can read internal address 192.168.0.100 but
>>>> not
>>>> external one
>>>>
>>>> - is the machine where Apache is running the same as the machine where
>>>> you
>>>> use your browser ? How many machines are there in your internal networ=
k
>>>> ?
>>>> 2 one destop server and one laptop
>>>> Another important aspect : you give two "public" (Internet) IP address=
es
>>>> above. Are these two IP addresses permanent (always the same), or do
>>>> they
>>>> change every day, or when you reboot your Internet router ?
>>>> permanent i tried a few days
>>>>
>>>>
>>>> ------------------------------------------------------------ ---------
>>>> The official User-To-User support forum of the Apache HTTP Server
>>>> Project.
>>>> See for more info.
>>>> To unsubscribe, e-mail:
>>>> users-unsubscribe@httpd.apache.org
>>>> " from the digest: g
>>>> >
>>>> users-digest-unsubscribe@httpd.apache.org
>>>> For additional commands, e-mail:
>>>> users-help@httpd.apache.org
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------ ---------
>>>> The official User-To-User support forum of the Apache HTTP Server
>>>> Project.
>>>> See for more info.
>>>> To unsubscribe, e-mail:
>>>> users-unsubscribe@httpd.apache.org
>>>> " from the digest: g
>>>> >
>>>> users-digest-unsubscribe@httpd.apache.org
>>>> For additional commands, e-mail:
>>>> users-help@httpd.apache.org
>>>>
>>>>
>>>>
>>>>
>>> ------------------------------------------------------------ ---------
>>> The official User-To-User support forum of the Apache HTTP Server
>>> Project.
>>> See for more info.
>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--00163646d5c424394f0469cf7914
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

http://192.168.0.1=
00:8080=A0is working for me now. Could you help try my external IP=20

24.78.136.243

Thanks,

=A0

On Wed, May 13, 2009 at 11:28 AM, Frank Gingras =
<francoi=
s.gingras@gmail.com> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Justin,

You'll need t=
o use http://192.1=
68.0.100:8080 from your internal machines, after you restarted httpd. r>

Frank.=20

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">I am not sure where to change th=
e port

I tried to change Listen rget=3D"_blank">192.168.0.100:80 --> :8080/" target=3D"_blank">192.168.0.100:8080. Even

internal IP is not working.

On Wed, May 13, 2009 at 11:1=
2 AM, Evan Platt < blank">evan@espphotography.com>wrote:

=A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"># telnet 24.78.136.243 =A080
=
Trying 24.78.136.243...
telnet: connect to address 78.136.243/" target=3D"_blank">24.78.136.243: Connection refused

telnet: Unable to connect to remote host

Did you change the port as =
J. Greenlees suggested?

At 10:58 AM 5/13/2009, you wrote:
>=A0 =A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">It is fixed IP address

24=
..78.136.243
Could you help me test from your side?

Thanks,
>

On Wed, May 13, 2009 at 8:24 AM, Andr=E9 Warnier <<mailto=
:> r>> =
wrote:

Hi.

We are making some progress.

First thing to try : turn of=
f your router, wait 30 sec, turn it back on.
Do you still have the same =
external IP address ?

Second thing to try : when you are sure that y=
ou still have the same

external IP address (or it has changed, and then tell us), you should reall=
y
try to access this IP address from the outside.
You cannot do tha=
t from inside your own network, if you have only one
internet connection=
.. =A0We can try it for you, after you turn off/on your

router and verify its address again.

The problem is probably that yo=
ur router (who is the one that has this
external IP address), does not k=
now that when some external computer tries
to contact it on port 80, it =
should pass on this call to your internal

webserver. =A0So it tries to answer itself, but itself has no webserver act=
ive
on port 80.

Justin Zhang wrote:
On Wed, May 13=
, 2009 at 7:58 AM, Andr=E9 Warnier <<mailto: sa.com" target=3D"_blank">aw@ice-sa.com>

> wr=
ote:

Justin Zhang wrote:

Thank you for the quick reply. How d=
o I know which external IP address is
right. I got 2 different address f=
rom myIPaddress with & without phone

router. 24.78.136.243 and 24.78.147.173. Is my configuration right?
Serv=
erName <http://24.78=
..147.173/>24.78.=
147.173:80<http:=
//24.78.147.173/><<

http://24.78.147.173/ a>>http://24.78.147.=
173/>

Justin,

there are 2 separate things :
- one i=
s your Apache server, which runs on some machine (of a type we do

not know yet), but we do know that it has an internal IP address of
192.=
168.0.100, and we do know that, apparently, from some (other ?)
computer=

in your internal network, you can access this Apache server at address<=
br>
192.168.0.100.
More, we don't know, because you have not said.
Bu=
t you got it running, so that is good.

- the second is your network =
configuration. =A0Of that one, we know very
little, and it is a bit conf=
using when you talk about "with & without

phone
router" and two different (apparently public) IP addresses. r>
Can you describe your configuration a bit better, like :
- what ma=
chine and OS is the Apache running on ?

Windows XP

- what version of Apache, and where did you get it ?

=A0Win32 Bi=
nary including OpenSSL 0.9.8i (MSI Installer):
apache_2.2.11-win32-x86-o=
penssl-0.9.8i.msi<<
pache/httpd/binaries/win32/apache_2.2.11-win32-x86-openssl-0 .9.8i.msi" targ=
et=3D"_blank">http://mirror.csclub.uwaterloo.ca/apache/httpd /binaries/win32=
/apache_2.2.11-win32-x86-openssl-0.9.8i.msi

=A0 =A0 =A0 es/win32/apache_2.2.11-win32-x86-openssl-0.9.8i.msi" target=3D"_blank">http=
://mirror.csclub.uwaterloo.ca/apache/httpd/binaries/win32/ap ache_2.2.11-win=
32-x86-openssl-0.9.8i.msi

=A0 =A0 =A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">[
=A0 =A0 =A0 =A0
uote>PGP<<
n32/apache_2.2.11-win32-x86-openssl-0.9.8i.msi.asc" target=3D"_blank">http:=
//www.apache.org/dist/httpd/binaries/win32/apache_2.2.11-win 32-x86-openssl-=
0.9.8i.msi.asc

=A0 =A0 =A0 e_2.2.11-win32-x86-openssl-0.9.8i.msi.asc" target=3D"_blank">http://www.apa=
che.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-op enssl-0.9.8i.ms=
i.asc

=A0 =A0 =A0

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">]
=A0 =A0 =A0 =A0
uote>[MD5<<
in32/apache_2.2.11-win32-x86-openssl-0.9.8i.msi.md5" target=3D"_blank">http=
://www.apache.org/dist/httpd/binaries/win32/apache_2.2.11-wi n32-x86-openssl=
-0.9.8i.msi.md5

=A0 =A0 =A0 e_2.2.11-win32-x86-openssl-0.9.8i.msi.md5" target=3D"_blank">http://www.apa=
che.org/dist/httpd/binaries/win32/apache_2.2.11-win32-x86-op enssl-0.9.8i.ms=
i.md5>]

from Apache.org

- do you have one, or two connection=
s to the Internet ?

I have one connection

- what are you =
doing to try to access your webserver from the Internet ?
what machine a=
re you using for that, and how is it connected to what ?

just testing to browser the default installed page. I tried with an=
other
computer in the network it can read internal address 192.168.0.100=
but not
external one

- is the machine where Apache is running th=
e same as the machine where you

use your browser ? How many machines are there in your internal network ? r>2 one destop server and one laptop
Another important aspect : you give=
two "public" (Internet) IP addresses
above. Are these two IP =
addresses permanent (always the same), or do they

change every day, or when you reboot your Internet router ?
permanent i =
tried a few days

-----------------------------------------------=
----------------------
The official User-To-User support forum of the Ap=
ache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: <mailto: ache.org" target=3D"_blank">users-unsubscribe@httpd.apache.org>

use=
rs-unsubscribe@httpd.apache.org
=A0" =A0 from the digest: <m=
ailto: =3D"_blank">users-digest-unsubscribe@httpd.apache.org>

nk">users-digest-unsubscribe@httpd.apache.org
For additional command=
s, e-mail: <mailto: =3D"_blank">users-help@httpd.apache.org>

users-help=
@httpd.apache.org

------------------------------=
---------------------------------------
The official User-To-User suppor=
t forum of the Apache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: <mailto: ache.org" target=3D"_blank">users-unsubscribe@httpd.apache.org>

use=
rs-unsubscribe@httpd.apache.org
=A0" =A0 from the digest: <m=
ailto: =3D"_blank">users-digest-unsubscribe@httpd.apache.org>

nk">users-digest-unsubscribe@httpd.apache.org
For additional command=
s, e-mail: <mailto: =3D"_blank">users-help@httpd.apache.org>

users-help=
@httpd.apache.org

=A0 =A0 =A0
--------------=
-------------------------------------------------------
The official Use=
r-To-User support forum of the Apache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: arget=3D"_blank">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: ttpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.or=
g
For additional commands, e-mail: d.apache.org" target=3D"_blank">users-help@httpd.apache.org

=A0 =A0

=A0

-------=
------------------------------------------------------------ --
The offic=
ial User-To-User support forum of the Apache HTTP Server Project.
See &l=
t;URL:=
http://httpd.apache.org/userslist.html> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--00163646d5c424394f0469cf7914--

Re: Fwd: Home Web Server
am 13.05.2009 20:46:44 von aw
Justin Zhang wrote:
> http://192.168.0.100:8080 is working for me now. Could you help try my
> external IP
>
> 24.78.136.243
> Thanks,

Doesn't work : connection refused.

I believe now is time for a pause to think.

When we connect from outside to the address 24.78.136.243, we in fact
connect to your router.
Your router is not your webserver.
Your router should know, that when it receives a connection to its port
80 (or 8080), it should forward this connection to your Apache server,
at the IP address 192.168.0.100.
Is there something in your router configuration that tells it to do that ?

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 13.05.2009 20:47:48 von Justin Zhang
--001636832482d4d4980469cfa5d6
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thank you for the tips. I have to clarify my current configuration

Listen 8080
ServerName 24.78.136.243

Now both http://192.168.0.100/ and http://192.168.0.100:8080/ are working.
Still need testing external IP 24.78.136.243.

On Wed, May 13, 2009 at 11:33 AM, Andr=E9 Warnier wrote:

> Justin Zhang wrote:
>
>> Is my cofiguration right?
>>
>> Listen 192.168.0.100:80
>> ServerName 24.78.136.243:80
>>
>> Not entirely. Simplify :
> Listen 80
> ServerName 24.78.136.243
>
>
> Some tips :
> - do not make changes to the configuration unless you know exactly why yo=
u
> are making them, and what you are doing.
> - make one single change at a time, restart Apache, and check that it sti=
ll
> works like it did before.
> - do not make changes in-between messages that you post here, or else you
> will upset the people trying to help you, and they will not answer anymor=
e
>
> You have a basically working Apache now. Do not ruin it, or else it is
> going to be very hard to fix what does not work yet.
> So far, your problem does not seem to be with Apache, but with the networ=
k
> outside of Apache.
>
> Now about the change I recommended above, and why :
>
> Listen 192.168.0.100:80
> is unnecessarily restrictive. It means that your Apache will only proce=
ss
> requests that arrive on its interface that has the IP address
> "192.168.0.100". So it would not process request that arrive on is
> interface 127.0.0.1 (the loopback interface).
> Listen 80
> means : process all requests arriving for port 80, no matter through whic=
h
> interface they arrive.
>
>
>
>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--001636832482d4d4980469cfa5d6
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thank you for the tips. I have to clarify my current=A0configuration div>

=A0

Listen 8080

ServerName 24.78.136.243

=A0

Now both =
=A0and http://192.168.0.100:8080/ >=A0are working. Still need testing external IP 24.78.136.243.

=A0

=A0

On Wed, May 13, 2009 at 11:33 AM, Andr=E9 Warnie=
r <&=
gt; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Is my cofiguration right?
>Listen 192.168.0.100:8=
0

ServerName 24.78.136.24=
3:80

Not entirely. =A0Simplify :
Listen 80=
=20

ServerName 24.78.136.243

Some tips :=

- do not make changes to the configuration unless you know exactly why =
you are making them, and what you are doing.
- make one single change at=
a time, restart Apache, and check that it still works like it did before.<=
br>
- do not make changes in-between messages that you post here, or else you w=
ill upset the people trying to help you, and they will not answer anymore r>
You have a basically working Apache now. Do not ruin it, or else it i=
s going to be very hard to fix what does not work yet.

So far, your problem does not seem to be with Apache, but with the network =
outside of Apache.

Now about the change I recommended above, and why=
:=20

Listen =3D"_blank">192.168.0.100:80
is unnecessarily restrictive. It =
means that your Apache will only process requests that arrive on its inte=
rface that has the IP address "192.168.0.100". =A0So it would not=
process request that arrive on is interface 127.0.0.1 (the loopback interf=
ace).

Listen 80
means : process all requests arriving for port 80, no matter t=
hrough which interface they arrive.=20

---------------------------------=
------------------------------------
The official User-To-User support f=
orum of the Apache HTTP Server Project.
See <URL: tpd.apache.org/userslist.html" target=3D"_blank">http://httpd.apache.org/us=
erslist.html> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--001636832482d4d4980469cfa5d6--

Re: Fwd: Home Web Server
am 13.05.2009 20:52:30 von Justin Zhang
--0016363b85cac4835d0469cfb646
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Current router configuration
Virtual Server HTTP 192.168.0.100 TCP 8080/8080 Always
Private port and public port are all 8080. Before it is 80/80 for port 80

On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnier wrote:

> Justin Zhang wrote:
>
>> http://192.168.0.100:8080 is working for me now. Could you help try my
>> external IP
>>
>> 24.78.136.243
>> Thanks,
>>
>
> Doesn't work : connection refused.
>
> I believe now is time for a pause to think.
>
> When we connect from outside to the address 24.78.136.243, we in fact
> connect to your router.
> Your router is not your webserver.
> Your router should know, that when it receives a connection to its port 8=
0
> (or 8080), it should forward this connection to your Apache server, at th=
e
> IP address 192.168.0.100.
> Is there something in your router configuration that tells it to do that =
?
>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016363b85cac4835d0469cfb646
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Current router configuration

er=3D"0">

Virtual=A0Server=A0HTTP<=
/td>
192.168.0.100 TCP 8080/8080 Always

Private port and public port are all 8080. Before it is 80/80 for port=
80

=A0

On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnie=
r <&=
gt; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"> 8080/" target=3D"_blank">http://192.168.0.100:8080 is working for me no=
w. Could you help try my

external IP

24.78.136.243
Thanks,

Doe=
sn't work : connection refused.

I believe now is time for a paus=
e to think.

When we connect from outside to the address 24.78.136.24=
3, we in fact connect to your router.

Your router is not your webserver.
Your router should know, that when it=
receives a connection to its port 80 (or 8080), it should forward this con=
nection to your Apache server, at the IP address 192.168.0.100.
Is there=
something in your router configuration that tells it to do that ?=20

---------------------------------------------=
------------------------
The official User-To-User support forum of the =
Apache HTTP Server Project.
See <URL: rg/userslist.html" target=3D"_blank">http://httpd.apache.org/userslist.html=
> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016363b85cac4835d0469cfb646--

Re: Fwd: Home Web Server
am 14.05.2009 09:06:26 von lists
Justin Zhang wrote:
> Is my cofiguration right?
>
> Listen 192.168.0.100:80
> ServerName 24.78.136.243:80
>

Listen :8080
ServerName 24.78.136.243

Though the default for the ServerName directive, of not specifying or
using it, works better for an apache installation with a dhcp driven ip
address. Shaw uses DHCP for ip addresses unless you buy a business
account, which really is an expensive, limited account.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

RE: Fwd: Home Web Server
am 14.05.2009 17:45:51 von Richard Peacock
------_=_NextPart_001_01C9D4AB.0F00AE2E
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hello

It's still not working:

"The server at 24.78.136.243 is taking too long to respond."

That's from http://24.78.136.243:8080/

If it works from your internal network (ie http://192.168.0.100:8080 p://192.168.0.100:8080/> ) then it's a port-forwarding or firewall issue. P=
erhaps check the local webserver's firewall logs or temporarily disable it?

Good luck!

________________________________

From: Justin Zhang [mailto:justinzhang1969@gmail.com]
Sent: 13 May 2009 19:53
To: users@httpd.apache.org; aw@ice-sa.com
Subject: Re: [users@httpd] Fwd: Home Web Server

Current router configuration

Virtual Server HTTP

192.168.0.100

TCP 8080/8080

Always

Private port and public port are all 8080. Before it is 80/80 for port 80

On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnier wrote:

Justin Zhang wrote:

http://192.168.0.100:8080 is working for me=
now. Could you help try my
external IP

24.78.136.243*
Thanks,

Doesn't work : connection refused.

I believe now is time for a pause to think.

When we connect from outside to the address 24.78.136.243, we in fact con=
nect to your router.
Your router is not your webserver.
Your router should know, that when it receives a connection to its port 8=
0 (or 8080), it should forward this connection to your Apache server, at th=
e IP address 192.168.0.100.
Is there something in your router configuration that tells it to do that =
?

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project=
..
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

****
Privileged/Confidential Information may be contained in this
message. If you are not the addressee indicated in this
message (or responsible for delivery of the message to such
person), you must not copy, distribute or take any action in
reliance to it.
In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately
if you or your employer do not consent to Internet email for
messages of this kind. Opinions, conclusions and other
information in this message that do not relate to the official
business of Minorplanet Systems plc shall be understood as
neither given nor endorsed by it. Minorplanet Systems plc, Registration n=
o: 3372097
Minorplanet Limited, Registration no: 4072786
Greenwich House, 223 North Street, Leeds, LS7 2AA
VAT #: 698 1438 86

------_=_NextPart_001_01C9D4AB.0F00AE2E
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns=3D"http://www.w3.org/TR/REC-html40">

1">

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Hello

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>It’s still not working: o:p>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>“The server at 24.78.136.243 i=
s
taking too long to respond.”

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>That’s from href=3D"http://24.78.136.243:8080/">http://24.78.136.243:808 0/ o:p>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>If it works from your internal netwo=
rk (ie
) the=
n it’s
a port-forwarding or firewall issue. Perhaps check the local webserver=
217;s
firewall logs or temporarily disable it?

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Good luck!<=
/p>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>

=3D'font-size:
10.0pt;font-family:Arial;color:navy'>

ize=3D3
face=3D"Times New Roman">

size:10.0pt;
font-family:Tahoma;font-weight:bold'>From: 2
face=3DTahoma> Justin=
Zhang
[mailto:justinzhang1969@gmail.com]

Sent: 13 May 2009 19:53 >
To: users@httpd.apache.org=
;
aw@ice-sa.com

Subject: Re: [users@httpd]=
Fwd:
Home Web Server

=3D'font-size:
12.0pt'>

=3D'font-size:
12.0pt'>Current router configuration

width=3D"100%"
style=3D'width:100.0%' id=3DtabVS>

face=3D"Times New Roman">Virtual =
Server HTTP

face=3D"Times New Roman">192.168.0.100=

face=3D"Times New Roman">TCP 8080/8080=

style=3D'font-size:12.0pt'>Always

=3D'font-size:
12.0pt'>Private port and public port are all 8080. Before it is 80/80 for=
port
80

=3D'font-size:
12.0pt'>

=3D'font-size:
12.0pt'>On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnier < href=3D"mailto:aw@ice-sa.com">aw@ice-sa.com> wrote: an>

=3D'font-size:
12.0pt'>Justin Zhang wrote:

=3D'font-size:
12.0pt'>http://1=
92.168.0.100:8080
is working for me now. Could you help try my

external IP

24.78.136.243

Thanks,

=3D'font-size:
12.0pt'>

=3D'font-size:
12.0pt'>Doesn't work : connection refused.

I believe now is time for a pause to think.

When we connect from outside to the address 24.78.136.243, we in fact con=
nect
to your router.

Your router is not your webserver.

Your router should know, that when it receives a connection to its port 8=
0 (or
8080), it should forward this connection to your Apache server, at the IP
address 192.168.0.100.

Is there something in your router configuration that tells it to do that =
?

face=3D"Times New Roman">

------------------------------------------------------------ ---------

The official User-To-User support forum of the Apache HTTP Server Project=
..

See <URL: _blank">http://httpd.apache.org/userslist.html>
for more info.

To unsubscribe, e-mail: org"
target=3D"_blank">users-unsubscribe@httpd.apache.org

" from the digest: href=3D"mailto:users-digest-unsubscribe@httpd.apache.org" target=3D"_blan=
k">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: e.org"
target=3D"_blank">users-help@httpd.apache.org >

=3D'font-size:
12.0pt'>

** =

Privileged/Confidential
Information may be contained in this
message. If you are not the addr=
essee
indicated in this
message (or responsible for delivery of the message=
to
such
person), you must not copy, distribute or take any action in

reliance to it.
In such case, you should destroy this message and =
kindly

notify the sender by reply email. Please advise immediately
if yo=
u or
your employer do not consent to Internet email for
messages of this k=
ind.
Opinions, conclusions and other
information in this message that do n=
ot
relate to the official
business of Minorplanet Systems plc shall be
understood as
neither given nor endorsed by it.

Minorplanet Systems plc, Registration no: 3372097
Minorplanet Lim=
ited,
Registration no: 4072786
Greenwich House, 223 North Street, Leeds, LS7=

2AA
VAT #: 698 1438
86
=

------_=_NextPart_001_01C9D4AB.0F00AE2E--

Re: Fwd: Home Web Server
am 14.05.2009 17:54:21 von Justin Zhang
--0016364d26336beae50469e1572e
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: quoted-printable

Now only local address is working http://192.168.0.100:8080/

Besides myIPaddress, is there any other way to check my external IP address=
..
Since I got different IPs with and without Phone adapter. 24.78.136.243 is
with phone adapter, and the other one is 24.78.147.173. I donot know which
one is right or both are not right.

Thanks, Justin

On Thu, May 14, 2009 at 8:45 AM, Richard Peacock <
richard.peacock@minorplanet.com> wrote:

> Hello
>
>
>
> It=92s still not working:
>
>
>
> =93The server at 24.78.136.243 is taking too long to respond.=94
>
>
>
> That=92s from http://24.78.136.243:8080/
>
> If it works from your internal network (ie http://192.168.0.100:8080) the=
n
> it=92s a port-forwarding or firewall issue. Perhaps check the local
> webserver=92s firewall logs or temporarily disable it?
>
> Good luck!
>
>
>
>
> ------------------------------
>
> From: Justin Zhang [mailto:justinzhang1969@gmail.com]
> Sent: 13 May 2009 19:53
> To: users@httpd.apache.org; aw@ice-sa.com
> Subject: Re: [users@httpd] Fwd: Home Web Server
>
>
>
> Current router configuration
>
> Virtual Server HTTP
>
> 192.168.0.100
>
> TCP 8080/8080
>
> Always
>
> Private port and public port are all 8080. Before it is 80/80 for port 80
>
>
>
>
>
> On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnier wrote:
>
> Justin Zhang wrote:
>
> http://192.168.0.100:8080 is working for me now. Could you help try my
> external IP
>
> 24.78.136.243
> Thanks,
>
>
>
> Doesn't work : connection refused.
>
> I believe now is time for a pause to think.
>
> When we connect from outside to the address 24.78.136.243, we in fact
> connect to your router.
> Your router is not your webserver.
> Your router should know, that when it receives a connection to its port 8=
0
> (or 8080), it should forward this connection to your Apache server, at th=
e
> IP address 192.168.0.100.
> Is there something in your router configuration that tells it to do that =
?
>
>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
>
>
> ****
> Privileged/Confidential Information may be contained in this
> message. If you are not the addressee indicated in this
> message (or responsible for delivery of the message to such
> person), you must not copy, distribute or take any action in
> reliance to it.
> In such case, you should destroy this message and kindly
> notify the sender by reply email. Please advise immediately
> if you or your employer do not consent to Internet email for
> messages of this kind. Opinions, conclusions and other
> information in this message that do not relate to the official
> business of Minorplanet Systems plc shall be understood as
> neither given nor endorsed by it.
> Minorplanet Systems plc, Registration no: 3372097
> Minorplanet Limited, Registration no: 4072786
> Greenwich House, 223 North Street, Leeds, LS7 2AA
> VAT #: 698 1438 86
>
>
>
>

--0016364d26336beae50469e1572e
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: quoted-printable

Now only local address is working /">http://192.168.0.100:8080/=A0

=A0

Besides myIPaddress, is there any other way to check my external IP ad=
dress. Since I got different IPs with and without Phone adapter. r=3D"#000080">24.78.136.243=A0 is with phone adapter, and the other one is =
24.78.147.173. I donot know which one is right or both are not right. >

=A0

Thanks, Justin

On Thu, May 14, 2009 at 8:45 AM, Richard Peacock=
<r=
ichard.peacock@minorplanet.com> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

10pt; COLOR: navy; FONT-FAMILY: Arial">Hello

10pt; COLOR: navy; FONT-FAMILY: Arial">=A0

10pt; COLOR: navy; FONT-FAMILY: Arial">It=92s still not working: ont>

10pt; COLOR: navy; FONT-FAMILY: Arial">=A0

10pt; COLOR: navy; FONT-FAMILY: Arial">=93The server at 24.78.136.243 is t=
aking too long to respond.=94

10pt; COLOR: navy; FONT-FAMILY: Arial">=A0

10pt; COLOR: navy; FONT-FAMILY: Arial">That=92s from 78.136.243:8080/" target=3D"_blank">http://24.78.136.243:8080/ font>

10pt; COLOR: navy; FONT-FAMILY: Arial">If it works from your internal netw=
ork (ie http://192=
..168.0.100:8080) then it=92s a port-forwarding or firewall issue. Perha=
ps check the local webserver=92s firewall logs or temporarily disable it? span>

10pt; COLOR: navy; FONT-FAMILY: Arial">Good luck!

10pt; COLOR: navy; FONT-FAMILY: Arial">=A0

10pt; COLOR: navy; FONT-FAMILY: Arial">=A0

Roman" size=3D"3">

NT-SIZE: 10pt; FONT-FAMILY: Tahoma">From: homa" size=3D"2"> Just=
in Zhang [mailto: ank">justinzhang1969@gmail.com]

Sent: 13 May 2009 19:53
=
To: @httpd.apache.org" target=3D"_blank">users@httpd.apache.org; "mailto:aw@ice-sa.com" target=3D"_blank">aw@ice-sa.com=20

Subject:<=
/b> Re: [users@httpd] Fwd: Home Web Server

">=A0

">Current router configuration

00%" border=3D"0">

DDING-TOP: 0in">

">Virtual=A0Server=A0HTTP
=
DDING-TOP: 0in">

">192.168.0.100
DDING-TOP: 0in">

">TCP 8080/8080
DDING-TOP: 0in">

">Always

">Private port and public port are all 8080. Before it is 80/80 for port 80=

">

=A0

">On Wed, May 13, 2009 at 11:46 AM, Andr=E9 Warnier < w@ice-sa.com" target=3D"_blank">aw@ice-sa.com> wrote:<=
/p>

">Justin Zhang wrote:

">http://192.168.0=
..100:8080 is working for me now. Could you help try my
external IP r>

24.78.136.243
Thanks,

">=A0

">Doesn't work : connection refused.

I believe now is time for a=
pause to think.

When we connect from outside to the address 24.78.1=
36.243, we in fact connect to your router.

Your router is not your webserver.
Your router should know, that when it=
receives a connection to its port 80 (or 8080), it should forward this con=
nection to your Apache server, at the IP address 192.168.0.100.
Is there=
something in your router configuration that tells it to do that ? <=
/font>

=

-------------------------------=
--------------------------------------
The official User-To-User support=
forum of the Apache HTTP Server Project.

See <URL: lank">http://httpd.apache.org/userslist.html> for more info.
To u=
nsubscribe, e-mail: arget=3D"_blank">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: ttpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.or=
g
For additional commands, e-mail: d.apache.org" target=3D"_blank">users-help@httpd.apache.org t>

">=A0

****************************** =

Privileged/Confidential Information may be contained in this
me=
ssage. If you are not the addressee indicated in this
message (or respo=
nsible for delivery of the message to such

person), you must not copy, distribute or take any action in
reliance t=
o it.
In such case, you should destroy this message and kindly
notif=
y the sender by reply email. Please advise immediately
if you or your e=
mployer do not consent to Internet email for

messages of this kind. Opinions, conclusions and other
information in t=
his message that do not relate to the official
business of Minorplanet =
Systems plc shall be understood as
neither given nor endorsed by it. iv>

Minorplanet Systems plc, Registration no: 3372097
Minorplanet Limit=
ed, Registration no: 4072786
Greenwich House, 223 North Street, Leeds, L=
S7 2AA
VAT #: 698 1438 86
=

=A0

--0016364d26336beae50469e1572e--

Re: Fwd: Home Web Server
am 14.05.2009 17:57:21 von aw
Justin Zhang wrote:
> Now only local address is working http://192.168.0.100:8080/
>
> Besides myIPaddress, is there any other way to check my external IP address.
> Since I got different IPs with and without Phone adapter. 24.78.136.243 is
> with phone adapter, and the other one is 24.78.147.173. I donot know which
> one is right or both are not right.
>
Well, we do not know either. To me that setup is a bit mysterious, but
that may be because I'm in Europe as opposed to Canada.
Can you try to draw some kind of picture of what is connected to what ?

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

RE: Fwd: Home Web Server
am 14.05.2009 18:14:41 von Richard Peacock
www.whatismyipaddress.com

Your router should also show the external/public IP but on my Smoothwall =
it gives me a different one to what it really is lol so use that website ab=
ove!

Rich

-----Original Message-----
From: Andr=E9 Warnier [mailto:aw@ice-sa.com]
Sent: 14 May 2009 16:57
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server

Justin Zhang wrote:
> Now only local address is working http://192.168.0.100:8080/
>
> Besides myIPaddress, is there any other way to check my external IP add=
ress.
> Since I got different IPs with and without Phone adapter. 24.78.136.243=
is
> with phone adapter, and the other one is 24.78.147.173. I donot know wh=
ich
> one is right or both are not right.
>
Well, we do not know either. To me that setup is a bit mysterious, but
that may be because I'm in Europe as opposed to Canada.
Can you try to draw some kind of picture of what is connected to what ?

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project=
..
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Privileged/Confidential Information may be contained in this
message. If you are not the addressee indicated in this
message (or responsible for delivery of the message to such
person), you must not copy, distribute or take any action in
reliance to it.
In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately
if you or your employer do not consent to Internet email for
messages of this kind. Opinions, conclusions and other
information in this message that do not relate to the official
business of Minorplanet Systems plc shall be understood as
neither given nor endorsed by it. Minorplanet Systems plc, Registration n=
o: 3372097
Minorplanet Limited, Registration no: 4072786
Greenwich House, 223 North Street, Leeds, LS7 2AA
VAT #: 698 1438 86
****

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 18:15:38 von Justin Zhang
--0016367f96947ab6030469e1a3ba
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

You can see the diagram in the link
http://en.wikipedia.org/wiki/File:Voip-typical.gif
Thanks

On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier wrote:

> Justin Zhang wrote:
>
>> Now only local address is working http://192.168.0.100:8080/
>>
>> Besides myIPaddress, is there any other way to check my external IP
>> address.
>> Since I got different IPs with and without Phone adapter. 24.78.136.243
>> is
>> with phone adapter, and the other one is 24.78.147.173. I donot know whi=
ch
>> one is right or both are not right.
>>
>> Well, we do not know either. To me that setup is a bit mysterious, but
> that may be because I'm in Europe as opposed to Canada.
> Can you try to draw some kind of picture of what is connected to what ?
>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016367f96947ab6030469e1a3ba
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

You can see the diagram in the link /wiki/File:Voip-typical.gif">http://en.wikipedia.org/wiki/Fi le:Voip-typical=
..gif

Thanks

On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier=
<&g=
t; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Now only local address is workin=
g http://192.168.0=
..100:8080/

Besides myIPaddress, is there any other way to check my external IP add=
ress.
Since I got different IPs with and without Phone adapter. 24.78.13=
6.243 =A0is
with phone adapter, and the other one is 24.78.147.173. I do=
not know which

one is right or both are not right.

Well, we do n=
ot know either. =A0To me that setup is a bit mysterious, but that may be be=
cause I'm in Europe as opposed to Canada.
Can you try to draw some k=
ind of picture of what is connected to what ?=20

---------------------------------------------=
------------------------
The official User-To-User support forum of the =
Apache HTTP Server Project.
See <URL: rg/userslist.html" target=3D"_blank">http://httpd.apache.org/userslist.html=
> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016367f96947ab6030469e1a3ba--

Re: Fwd: Home Web Server
am 14.05.2009 18:24:43 von aw
Ok, seen.

Is that exactly your setup ?
(if not, tell us what is different compared to the picture)

Also, when you talk below of "with and without Phone adapter", what do
you mean exactly ? are you switching the cables around, turning
something on or off, or what ?

Also, when you talk about "router", which box do you mean ?

Justin Zhang wrote:
> You can see the diagram in the link
> http://en.wikipedia.org/wiki/File:Voip-typical.gif
> Thanks
>
> On Thu, May 14, 2009 at 8:57 AM, André Warnier wrote:
>
>> Justin Zhang wrote:
>>
>>> Now only local address is working http://192.168.0.100:8080/
>>>
>>> Besides myIPaddress, is there any other way to check my external IP
>>> address.
>>> Since I got different IPs with and without Phone adapter. 24.78.136.243
>>> is
>>> with phone adapter, and the other one is 24.78.147.173. I donot know which
>>> one is right or both are not right.
>>>
>>> Well, we do not know either. To me that setup is a bit mysterious, but
>> that may be because I'm in Europe as opposed to Canada.
>> Can you try to draw some kind of picture of what is connected to what ?
>>
>>
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 18:46:27 von Justin Zhang
--0016e6db66fab308900469e21199
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

My setup is exactly the same as the link picture.

I try connect routher via phone adapter and bypass phone adapter (direcly t=
o
DSL modem, i.e. taking phone adapter off) I got two different IPs from
myIPaddress.com. My routher is D-Link DI-524 wireless router

Thanks

On Thu, May 14, 2009 at 9:24 AM, Andr=E9 Warnier wrote:

> Ok, seen.
>
> Is that exactly your setup ?
> (if not, tell us what is different compared to the picture)
>
> Also, when you talk below of "with and without Phone adapter", what do yo=
u
> mean exactly ? are you switching the cables around, turning something on =
or
> off, or what ?
>
> Also, when you talk about "router", which box do you mean ?
>
>
>
>
>
> Justin Zhang wrote:
>
>> You can see the diagram in the link
>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>> Thanks
>>
>> On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier wrote:
>>
>> Justin Zhang wrote:
>>>
>>> Now only local address is working http://192.168.0.100:8080/
>>>>
>>>> Besides myIPaddress, is there any other way to check my external IP
>>>> address.
>>>> Since I got different IPs with and without Phone adapter. 24.78.136.24=
3
>>>> is
>>>> with phone adapter, and the other one is 24.78.147.173. I donot know
>>>> which
>>>> one is right or both are not right.
>>>>
>>>> Well, we do not know either. To me that setup is a bit mysterious, bu=
t
>>>>
>>> that may be because I'm in Europe as opposed to Canada.
>>> Can you try to draw some kind of picture of what is connected to what ?
>>>
>>>
>>>
>>> ------------------------------------------------------------ ---------
>>> The official User-To-User support forum of the Apache HTTP Server
>>> Project.
>>> See for more info.
>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>
>>>
>>>
>>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6db66fab308900469e21199
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

My setup is exactly the same as the link picture.

=A0

I try connect routher via phone adapter and bypass phone adapter (dire=
cly to DSL modem, i.e. taking phone adapter off) I got two different IPs fr=
om myIPaddress.com. My routher is D-Link DI-524 wireless router

=A0

Thanks

On Thu, May 14, 2009 at 9:24 AM, Andr=E9 Warnier=
<&g=
t; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Ok, seen.

Is that exactl=
y your setup ?
(if not, tell us what is different compared to the pictu=
re)

Also, when you talk below of "with and without Phone adapter"=
, what do you mean exactly ? are you switching the cables around, turning s=
omething on or off, or what ?

Also, when you talk about "router=
", which box do you mean ?=20

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">You can see the diagram in the l=
ink
t=3D"_blank">http://en.wikipedia.org/wiki/File:Voip-typical. gif

Thanks

On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier < =3D"mailto:aw@ice-sa.com" target=3D"_blank">aw@ice-sa.com> wrote: >

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Now only local address is workin=
g http://192.168.0=
..100:8080/

Besides myIPaddress, is there any other way to check my external IP
=
address.
Since I got different IPs with and without Phone adapter. 24.78=
..136.243
=A0is
with phone adapter, and the other one is 24.78.147.173=
.. I donot know which

one is right or both are not right.

Well, we do not know either. =A0=
To me that setup is a bit mysterious, but
that may be becau=
se I'm in Europe as opposed to Canada.
Can you try to draw some kind=
of picture of what is connected to what ?

------------------------------------------------------------ ---=
------
The official User-To-User support forum of the Apache HTTP Server=
Project.
See <URL: target=3D"_blank">http://httpd.apache.org/userslist.html> for more =
info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

ote>

----------------------------------------------=
-----------------------

The official User-To-User support forum of the Apache HTTP Server Project.<=
br>See <URL: "_blank">http://httpd.apache.org/userslist.html> for more info.
T=
o unsubscribe, e-mail: " target=3D"_blank">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: ttpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.or=
g
For additional commands, e-mail: d.apache.org" target=3D"_blank">users-help@httpd.apache.org

--0016e6db66fab308900469e21199--

Re: Fwd: Home Web Server
am 14.05.2009 19:57:34 von aw
Justin Zhang wrote:
> My setup is exactly the same as the link picture.
>
> I try connect routher via phone adapter and bypass phone adapter (direcly to
> DSL modem, i.e. taking phone adapter off) I got two different IPs from
> myIPaddress.com. My routher is D-Link DI-524 wireless router
>

Allright.
I refer to this page :
http://support.dlink.com/emulators/di524/st_devic.html

- Connect your router directly to the DSL modem, and disconnect the
Phone adapter.

- in your router configuration :
- in the "Firewall" part,
- click "enabled"
- Name : HTTP server
- Source/Interface : WAN
- Source/IP Ranges start/stop : empty ()
- Destination/Interface : LAN
- Destination/IP Range start/stop : both 192.168.0.100
- Destination/Protocol : TCP
- Destination/Port Range : 8080 and 8080
then click "Apply".

In your router config, go to Home, then Status, then look at WAN / IP
address, and tell us that address.

() we try first that, and if it does not work, we will try something else.

> Thanks
>
> On Thu, May 14, 2009 at 9:24 AM, André Warnier wrote:
>
>> Ok, seen.
>>
>> Is that exactly your setup ?
>> (if not, tell us what is different compared to the picture)
>>
>> Also, when you talk below of "with and without Phone adapter", what do you
>> mean exactly ? are you switching the cables around, turning something on or
>> off, or what ?
>>
>> Also, when you talk about "router", which box do you mean ?
>>
>>
>>
>>
>>
>> Justin Zhang wrote:
>>
>>> You can see the diagram in the link
>>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>>> Thanks
>>>
>>> On Thu, May 14, 2009 at 8:57 AM, André Warnier wrote:
>>>
>>> Justin Zhang wrote:
>>>> Now only local address is working http://192.168.0.100:8080/
>>>>> Besides myIPaddress, is there any other way to check my external IP
>>>>> address.
>>>>> Since I got different IPs with and without Phone adapter. 24.78.136.243
>>>>> is
>>>>> with phone adapter, and the other one is 24.78.147.173. I donot know
>>>>> which
>>>>> one is right or both are not right.
>>>>>
>>>>> Well, we do not know either. To me that setup is a bit mysterious, but
>>>>>
>>>> that may be because I'm in Europe as opposed to Canada.
>>>> Can you try to draw some kind of picture of what is connected to what ?
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------ ---------
>>>> The official User-To-User support forum of the Apache HTTP Server
>>>> Project.
>>>> See for more info.
>>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>>
>>>>
>>>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 20:28:36 von Justin Zhang
--0016e6db66fa01bb210469e37f4c
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Ip address is 192.168.0.1

On Thu, May 14, 2009 at 10:57 AM, Andr=E9 Warnier wrote:

> Justin Zhang wrote:
>
>> My setup is exactly the same as the link picture.
>>
>> I try connect routher via phone adapter and bypass phone adapter (direcl=
y
>> to
>> DSL modem, i.e. taking phone adapter off) I got two different IPs from
>> myIPaddress.com. My routher is D-Link DI-524 wireless router
>>
>>
> Allright.
> I refer to this page :
> http://support.dlink.com/emulators/di524/st_devic.html
>
> - Connect your router directly to the DSL modem, and disconnect the Phone
> adapter.
>
> - in your router configuration :
> - in the "Firewall" part,
> - click "enabled"
> - Name : HTTP server
> - Source/Interface : WAN
> - Source/IP Ranges start/stop : empty ()
> - Destination/Interface : LAN
> - Destination/IP Range start/stop : both 192.168.0.100
> - Destination/Protocol : TCP
> - Destination/Port Range : 8080 and 8080
> then click "Apply".
>
> In your router config, go to Home, then Status, then look at WAN / IP
> address, and tell us that address.
>
> () we try first that, and if it does not work, we will try something els=
e.
>
>
>
>
>
>
> Thanks
>>
>> On Thu, May 14, 2009 at 9:24 AM, Andr=E9 Warnier wrote:
>>
>> Ok, seen.
>>>
>>> Is that exactly your setup ?
>>> (if not, tell us what is different compared to the picture)
>>>
>>> Also, when you talk below of "with and without Phone adapter", what do
>>> you
>>> mean exactly ? are you switching the cables around, turning something o=
n
>>> or
>>> off, or what ?
>>>
>>> Also, when you talk about "router", which box do you mean ?
>>>
>>>
>>>
>>>
>>>
>>> Justin Zhang wrote:
>>>
>>> You can see the diagram in the link
>>>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>>>> Thanks
>>>>
>>>> On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier wrote=
:
>>>>
>>>> Justin Zhang wrote:
>>>>
>>>>> Now only local address is working http://192.168.0.100:8080/
>>>>>
>>>>>> Besides myIPaddress, is there any other way to check my external IP
>>>>>> address.
>>>>>> Since I got different IPs with and without Phone adapter.
>>>>>> 24.78.136.243
>>>>>> is
>>>>>> with phone adapter, and the other one is 24.78.147.173. I donot know
>>>>>> which
>>>>>> one is right or both are not right.
>>>>>>
>>>>>> Well, we do not know either. To me that setup is a bit mysterious,
>>>>>> but
>>>>>>
>>>>>> that may be because I'm in Europe as opposed to Canada.
>>>>> Can you try to draw some kind of picture of what is connected to what=
?
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------ ---------
>>>>> The official User-To-User support forum of the Apache HTTP Server
>>>>> Project.
>>>>> See for more info.
>>>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------ ---------
>>> The official User-To-User support forum of the Apache HTTP Server
>>> Project.
>>> See for more info.
>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>
>>>
>>>
>>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project=
..
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6db66fa01bb210469e37f4c
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Ip address is 192.168.0.1

On Thu, May 14, 2009 at 10:57 AM, Andr=E9 Warnie=
r <&=
gt; wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">My setup is exactly the same as =
the link picture.

I try connect routher via phone adapter and bypass=
phone adapter (direcly to

DSL modem, i.e. taking phone adapter off) I got two different IPs from
m=
yIPaddress.com. My routher is D-Link DI-524 wireless router

uote>
Allright.
I refer to this page :
port.dlink.com/emulators/di524/st_devic.html" target=3D"_blank">http://supp=
ort.dlink.com/emulators/di524/st_devic.html

- Connect your router directly to the DSL modem, and disconnect the Pho=
ne adapter.

- in your router configuration :
=A0- in the "Fi=
rewall" part,
=A0 - click "enabled"
=A0 - Name : HTTP =
server

=A0 - Source/Interface : WAN
=A0 - Source/IP Ranges start/stop : empty (=
)
=A0 - Destination/Interface : LAN
=A0 - Destination/IP Range start=
/stop : both 192.168.0.100
=A0 - Destination/Protocol : TCP
=A0 - Des=
tination/Port Range : 8080 and 8080

=A0then click "Apply".

In your router config, go to Home, =
then Status, then look at WAN / IP address, and tell us that address.
r>() we try first that, and if it does not work, we will try something els=
e.=20

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Thanks

On Thu, May 14, 20=
09 at 9:24 AM, Andr=E9 Warnier < =3D"_blank">aw@ice-sa.com> wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Ok, seen.

Is that exactl=
y your setup ?
(if not, tell us what is different compared to the pictu=
re)

Also, when you talk below of "with and without Phone adapter"=
, what do you
mean exactly ? are you switching the cables around, turnin=
g something on or
off, or what ?

Also, when you talk about "=
router", which box do you mean ?

Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">You can see the diagram in the l=
ink
t=3D"_blank">http://en.wikipedia.org/wiki/File:Voip-typical. gif

Thanks

On Thu, May 14, 2009 at 8:57 AM, Andr=E9 Warnier < =3D"mailto:aw@ice-sa.com" target=3D"_blank">aw@ice-sa.com> wrote: >
Justin Zhang wrote:

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Now only local address is workin=
g http://192.168.0=
..100:8080/

px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Besides myIPaddress, is there an=
y other way to check my external IP
address.
Since I got different IP=
s with and without Phone adapter. 24.78.136.243

=A0is
with phone adapter, and the other one is 24.78.147.173. I donot kn=
ow
which
one is right or both are not right.

Well, we do not k=
now either. =A0To me that setup is a bit mysterious, but

e>
that may be because I'm in Europe as opposed to Canada.
Can you try =
to draw some kind of picture of what is connected to what ?

=
------------------------------------------------------------ ---------

The official User-To-User support forum of the Apache HTTP Server
Projec=
t.
See <URL: =3D"_blank">http://httpd.apache.org/userslist.html> for more info. r>
To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

ckquote>
------------------------------------------------------=
---------------

The official User-To-User support forum of the Apache HTTP Server Project.<=
br>See <URL: "_blank">http://httpd.apache.org/userslist.html> for more info.
T=
o unsubscribe, e-mail: " target=3D"_blank">users-unsubscribe@httpd.apache.org

=A0" =A0 from the digest: ttpd.apache.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.or=
g
For additional commands, e-mail: d.apache.org" target=3D"_blank">users-help@httpd.apache.org

-----------------------------=
----------------------------------------
The official User-To-User suppo=
rt forum of the Apache HTTP Server Project.
See <URL: //httpd.apache.org/userslist.html" target=3D"_blank">http://httpd.apache.or=
g/userslist.html> for more info.

To unsubscribe, e-mail: g" target=3D"_blank">users-unsubscribe@httpd.apache.org
=A0" =
=A0 from the digest: e.org" target=3D"_blank">users-digest-unsubscribe@httpd.apache.org

For additional commands, e-mail: org" target=3D"_blank">users-help@httpd.apache.org

<=
/blockquote>

--0016e6db66fa01bb210469e37f4c--

Re: Fwd: Home Web Server
am 14.05.2009 20:59:09 von aw
Justin Zhang wrote:
> Ip address is 192.168.0.1

Justin, I am sorry but I give up.
The IP address above makes no sense as a WAN IP, so I have no idea what
your problem is.

>
> On Thu, May 14, 2009 at 10:57 AM, André Warnier wrote:
>
>> Justin Zhang wrote:
>>
>>> My setup is exactly the same as the link picture.
>>>
>>> I try connect routher via phone adapter and bypass phone adapter (direcly
>>> to
>>> DSL modem, i.e. taking phone adapter off) I got two different IPs from
>>> myIPaddress.com. My routher is D-Link DI-524 wireless router
>>>
>>>
>> Allright.
>> I refer to this page :
>> http://support.dlink.com/emulators/di524/st_devic.html
>>
>> - Connect your router directly to the DSL modem, and disconnect the Phone
>> adapter.
>>
>> - in your router configuration :
>> - in the "Firewall" part,
>> - click "enabled"
>> - Name : HTTP server
>> - Source/Interface : WAN
>> - Source/IP Ranges start/stop : empty ()
>> - Destination/Interface : LAN
>> - Destination/IP Range start/stop : both 192.168.0.100
>> - Destination/Protocol : TCP
>> - Destination/Port Range : 8080 and 8080
>> then click "Apply".
>>
>> In your router config, go to Home, then Status, then look at WAN / IP
>> address, and tell us that address.
>>
>> () we try first that, and if it does not work, we will try something else.
>>
>>
>>
>>
>>
>>
>> Thanks
>>> On Thu, May 14, 2009 at 9:24 AM, André Warnier wrote:
>>>
>>> Ok, seen.
>>>> Is that exactly your setup ?
>>>> (if not, tell us what is different compared to the picture)
>>>>
>>>> Also, when you talk below of "with and without Phone adapter", what do
>>>> you
>>>> mean exactly ? are you switching the cables around, turning something on
>>>> or
>>>> off, or what ?
>>>>
>>>> Also, when you talk about "router", which box do you mean ?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Justin Zhang wrote:
>>>>
>>>> You can see the diagram in the link
>>>>> http://en.wikipedia.org/wiki/File:Voip-typical.gif
>>>>> Thanks
>>>>>
>>>>> On Thu, May 14, 2009 at 8:57 AM, André Warnier wrote:
>>>>>
>>>>> Justin Zhang wrote:
>>>>>
>>>>>> Now only local address is working http://192.168.0.100:8080/
>>>>>>
>>>>>>> Besides myIPaddress, is there any other way to check my external IP
>>>>>>> address.
>>>>>>> Since I got different IPs with and without Phone adapter.
>>>>>>> 24.78.136.243
>>>>>>> is
>>>>>>> with phone adapter, and the other one is 24.78.147.173. I donot know
>>>>>>> which
>>>>>>> one is right or both are not right.
>>>>>>>
>>>>>>> Well, we do not know either. To me that setup is a bit mysterious,
>>>>>>> but
>>>>>>>
>>>>>>> that may be because I'm in Europe as opposed to Canada.
>>>>>> Can you try to draw some kind of picture of what is connected to what ?
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------ ---------
>>>>>> The official User-To-User support forum of the Apache HTTP Server
>>>>>> Project.
>>>>>> See for more info.
>>>>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>>>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>>>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------ ---------
>>>> The official User-To-User support forum of the Apache HTTP Server
>>>> Project.
>>>> See for more info.
>>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>>
>>>>
>>>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 21:02:22 von Evan Platt
At 11:28 AM 5/14/2009, you wrote:
>Ip address is 192.168.0.1

sigh... Can we please take this thread off list if there's someone
willing to help the OP offline? (I don't unfortunately have the time
to do so now).. But I mean serious - this is about 40+ messages in
just over 24 hours, and only about 3 of them are Apache related.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 21:11:58 von Frank Gingras
My thoughts, exactly. Have him hire a local geek for 15 minutes, and get
this over with.

Frank.

Evan Platt wrote:
> At 11:28 AM 5/14/2009, you wrote:
>> Ip address is 192.168.0.1
>
> sigh... Can we please take this thread off list if there's someone
> willing to help the OP offline? (I don't unfortunately have the time
> to do so now).. But I mean serious - this is about 40+ messages in
> just over 24 hours, and only about 3 of them are Apache related.
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server
> Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 14.05.2009 22:25:44 von aw
Well, yes. It was just my Apache evangelist streak at work.
But this is definitely not an Apache issue.

Frank Gingras wrote:
> My thoughts, exactly. Have him hire a local geek for 15 minutes, and get
> this over with.
>
> Frank.
>
> Evan Platt wrote:
>> At 11:28 AM 5/14/2009, you wrote:
>>> Ip address is 192.168.0.1
>>
>> sigh... Can we please take this thread off list if there's someone
>> willing to help the OP offline? (I don't unfortunately have the time
>> to do so now).. But I mean serious - this is about 40+ messages in
>> just over 24 hours, and only about 3 of them are Apache related.
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server
>> Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 15.05.2009 00:59:48 von Jonas Eckerman
Justin Zhang wrote:

> I try connect routher via phone adapter and bypass phone adapter
> (direcly to DSL modem, i.e. taking phone adapter off) I got two
> different IPs from myIPaddress.com.

This could be because you have get dynamic IP with DHCP. A possible
scenario:

First the phone adapter gets an IP from your ISPs DHCP server.

When you disconnect the phone adapter, the D-Link router needs an IP
from the DHCP server. Since the D-Link router has a different MAC
address it will get a different IP address.

Depending on the DHCP servers config you may get a new IP address every
now and then even if you don't change your setup.

With a dynamic IP you simply need to accept that your IP may change at
any time and that it is likely to change whenever you change your setup
or tur off the router or phone adapter (wichever connects to the DSL modem).

If this is a problem, you could use a dynamic DNS service to get a fixed
host name even though you have a dynamic IP.

Please note that I don't know if the above scenario is applicable to
your situation.

Regards
/Jonas
--
Jonas Eckerman
Fruktträdet & Förbundet Sveriges Dövblinda
http://www.fsdb.org/
http://www.frukt.org/
http://whatever.frukt.org/

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 15.05.2009 02:15:23 von Stephen Love
----JWMJ341b.12fdS.44cbM
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Content-Type: text/plain; charset=windows-1252

I have also found the modem equipment they supply from your provider als=
o has an IDENTIFIER that is equivelant to an IP address... in other word=
s, they TELL you that you have a DYNAMIC IP when there is a SEPARATE STA=
TIC IP identifying your EQUIPMENT... use THAT instead! If you press them=
HARD enough, they will tell you what it is!

See us online at http://www.LOVEnCompany.com.

---------- Original Message ----------
From: Jonas Eckerman
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server
Date: Fri, 15 May 2009 00:59:48 +0200

Justin Zhang wrote:

> I try connect routher via phone adapter and bypass phone adapter =

> (direcly to DSL modem, i.e. taking phone adapter off) I got two =

> different IPs from myIPaddress.com.

This could be because you have get dynamic IP with DHCP. A possible =

scenario:

First the phone adapter gets an IP from your ISPs DHCP server.

When you disconnect the phone adapter, the D-Link router needs an IP =

from the DHCP server. Since the D-Link router has a different MAC =

address it will get a different IP address.

Depending on the DHCP servers config you may get a new IP address every =
=

now and then even if you don't change your setup.

With a dynamic IP you simply need to accept that your IP may change at =

any time and that it is likely to change whenever you change your setup =
=

or tur off the router or phone adapter (wichever connects to the DSL mod=
em).

If this is a problem, you could use a dynamic DNS service to get a fixed=
=

host name even though you have a dynamic IP.

Please note that I don't know if the above scenario is applicable to =

your situation.

Regards
/Jonas
-- =

Jonas Eckerman
Fruktträdet & Förbundet Sveriges Dövblinda
http://www.fsdb.org/
http://www.frukt.org/
http://whatever.frukt.org/

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Projec=
t.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
________________________________________________________
Protect your investment. Click here to find the homeowner insurance poli=
cy that you need.
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsHGircQTqr bspipj2NKeFr=
6m7qvVEjyp3UHmranvdd6y337n9zyCk/
----JWMJ341b.12fdS.44cbM
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Content-Type: text/html; charset=windows-1252

I have also found the modem equipment they supply from your pr=
ovider also has an IDENTIFIER that is equivelant to an IP address... in =
other words, they TELL you that you have a DYNAMIC IP when there is a SE=
PARATE STATIC IP identifying your EQUIPMENT... use THAT instead! If you =
press them HARD enough, they will tell you what it is!

See us onl=
ine at http://www.LOVEnCompany.com.

---------- Original Message -=
---------
From: Jonas Eckerman <jonas_lists@frukt.org>
To: u=
sers@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server=

Date: Fri, 15 May 2009 00:59:48 +0200

Justin Zhang wrote:
=

> I try connect routher via phone adapter and bypass phone adapte=
r
> (direcly to DSL modem, i.e. taking phone adapter off) I got t=
wo
> different IPs from myIPaddress.com.

This could be bec=
ause you have get dynamic IP with DHCP. A possible
scenario:

=
First the phone adapter gets an IP from your ISPs DHCP server.

Wh=
en you disconnect the phone adapter, the D-Link router needs an IP
f=
rom the DHCP server. Since the D-Link router has a different MAC
add=
ress it will get a different IP address.

Depending on the DHCP se=
rvers config you may get a new IP address every
now and then even if=
you don't change your setup.

With a dynamic IP you simply need t=
o accept that your IP may change at
any time and that it is likely t=
o change whenever you change your setup
or tur off the router or pho=
ne adapter (wichever connects to the DSL modem).

If this is a pro=
blem, you could use a dynamic DNS service to get a fixed
host name e=
ven though you have a dynamic IP.

Please note that I don't kn=
ow if the above scenario is applicable to
your situation.

>Regards
/Jonas
--
Jonas Eckerman
Fruktträdet & För=
bundet Sveriges Dövblinda
http://www.fsdb.org/
http://www.frukt.=
org/
http://whatever.frukt.org/

------------------------------=
---------------------------------------
The official User-To-User sup=
port forum of the Apache HTTP Server Project.
See <URL:http://http=
d.apache.org/userslist.html> for more info.
To unsubscribe, e-mail=
: users-unsubscribe@httpd.apache.org
" from t=
he digest: users-digest-unsubscribe@httpd.apache.org
For additional c=
ommands, e-mail: users-help@httpd.apache.org

=
________________

qrbspipj2NKeFr6m7qvVEjyp3UHmranvdd6y337n9zyCk/ target=3D"_blank">Protect=
your investment. Click here to find the homeowner insurance policy that=
you need.

----JWMJ341b.12fdS.44cbM--

Re: Fwd: Home Web Server
am 15.05.2009 02:59:14 von Evan Platt
At 05:15 PM 5/14/2009, you wrote:

>I have also found the modem equipment they supply from your provider
>also has an IDENTIFIER that is equivelant to an IP address... in
>other words, they TELL you that you have a DYNAMIC IP when there is
>a SEPARATE STATIC IP identifying your EQUIPMENT... use THAT instead!
>If you press them HARD enough, they will tell you what it is!

What??? I've never heard this. And I worked at ISP's for 5 years, and
worked WITH ISP's for 10. I'm not sure what you're thinking of, but
that certainly isn't the case at any ISP I've ever worked for, with
or dealt with. Maybe on a point to point, but residential DSL or cable? No.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 15.05.2009 03:47:20 von Eric Covener
On Thu, May 14, 2009 at 8:15 PM, Stephen Love wrote:
>
> I have also found the modem equipment they supply from your provider also
> has an IDENTIFIER that is equivelant to an IP address... in other words,
> they TELL you that you have a DYNAMIC IP when there is a SEPARATE STATIC IP
> identifying your EQUIPMENT... use THAT instead! If you press them HARD
> enough, they will tell you what it is!

The truth is out there!

--
Eric Covener
covener@gmail.com

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 15.05.2009 04:05:29 von Stephen Love
----JWMJ6707.13edS.42f7M
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Content-Type: text/plain; charset=windows-1252

Shirley, you jest... how else could an equipment identify itself when tu=
rned on... I pressed COX CABLE after PURCASING DYNAMIC BUSINESS CABLE co=
nnection, only to find that they identified your EQUIPMENT before assign=
ing a DYNAMIC IP from the pool... but already HAD a PERMANENT EQUIPMENT =
IP. They gave me that one, and for the past year I have enjoyed STATIC I=
P of 68.99.64.11
Try it!

See us online at http://www.LOVEnCompany.com.

---------- Original Message ----------
From: Evan Platt
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server
Date: Thu, 14 May 2009 17:59:14 -0700

At 05:15 PM 5/14/2009, you wrote:

>I have also found the modem equipment they supply from your provider =

>also has an IDENTIFIER that is equivelant to an IP address... in =

>other words, they TELL you that you have a DYNAMIC IP when there is =

>a SEPARATE STATIC IP identifying your EQUIPMENT... use THAT instead! =

>If you press them HARD enough, they will tell you what it is!

What??? I've never heard this. And I worked at ISP's for 5 years, and =

worked WITH ISP's for 10. I'm not sure what you're thinking of, but =

that certainly isn't the case at any ISP I've ever worked for, with =

or dealt with. Maybe on a point to point, but residential DSL or cable? =
No. =

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Projec=
t.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

____________________
Meet active single Seniors for fun romance.
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsO3jAR0YtE 0lEKTL83xXQg=
7CmHPw1s52MSldwIEXwXky2ddoiOaAo/
----JWMJ6707.13edS.42f7M
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Content-Type: text/html; charset=windows-1252

Shirley, you jest... how else could an equipment identify itsel=
f when turned on... I pressed COX CABLE after PURCASING DYNAMIC BUSINESS=
CABLE connection, only to find that they identified your EQUIPMENT befo=
re assigning a DYNAMIC IP from the pool... but already HAD a PERMANENT E=
QUIPMENT IP. They gave me that one, and for the past year I have enjoyed=
STATIC IP of 68.99.64.11

Try it!

See us online at http://www.LOVEnCompany.com.

-=
--------- Original Message ----------
From: Evan Platt <evan@espph=
otography.com>
To: users@httpd.apache.org
Subject: Re: [users@h=
ttpd] Fwd: Home Web Server
Date: Thu, 14 May 2009 17:59:14 -0700
<=
BR>At 05:15 PM 5/14/2009, you wrote:

>I have also found the mo=
dem equipment they supply from your provider
>also has an IDENTIF=
IER that is equivelant to an IP address... in
>other words, they =
TELL you that you have a DYNAMIC IP when there is
>a SEPARATE STA=
TIC IP identifying your EQUIPMENT... use THAT instead!
>If you pr=
ess them HARD enough, they will tell you what it is!

What??? I've=
never heard this. And I worked at ISP's for 5 years, and
worked WIT=
H ISP's for 10. I'm not sure what you're thinking of, but
that certa=
inly isn't the case at any ISP I've ever worked for, with
or dealt w=
ith. Maybe on a point to point, but residential DSL or cable? No.
R>
------------------------------------------------------------ ------=
---
The official User-To-User support forum of the Apache HTTP Server=
Project.
See <URL:http://httpd.apache.org/userslist.html> for =
more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org=

" from the digest: users-digest-unsubscribe@=
httpd.apache.org
For additional commands, e-mail: users-help@httpd.ap=
ache.org

=

tE0lEKTL83xXQg7CmHPw1s52MSldwIEXwXky2ddoiOaAo/ target=3D"_blank">Meet ac=
tive single Seniors for fun romance.

----JWMJ6707.13edS.42f7M--

Re: Fwd: Home Web Server
am 15.05.2009 04:18:31 von Eric Covener
On Thu, May 14, 2009 at 10:05 PM, Stephen Love wrote:
> Shirley, you jest... how else could an equipment identify itself when turned
> on...

A MAC address is a good start.

--
Eric Covener
covener@gmail.com

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: Fwd: Home Web Server
am 15.05.2009 04:34:42 von Evan Platt
At 07:05 PM 5/14/2009, you wrote:

>Shirley, you jest... how else could an equipment identify itself
>when turned on... I pressed COX CABLE after PURCASING DYNAMIC
>BUSINESS CABLE connection, only to find that they identified your
>EQUIPMENT before assigning a DYNAMIC IP from the pool... but already
>HAD a PERMANENT EQUIPMENT IP. They gave me that one, and for the
>past year I have enjoyed STATIC IP of 68.99.64.11
>
>Try it!

It's called a MAC address.

So you have two IP addresses? What IP address shows if you go to
www.whatismyip.com ?

Because I see your 'secret' IP IS 68.99.64.11 in your mail headers:
X-Originating-IP: [68.99.64.11]

So, if this 'second' IP address is some hidden secret, it's not
hiding. What's your 'other' IP?

Sounds like Cox simply uses DHCP, but assigns the IP address based on
your mac address. I've had DSL where I've kept the same IP for
months. No big deal, I use a dynamic dns client.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

RE: Fwd: Home Web Server
am 15.05.2009 04:52:19 von Gund Wehsling
Just a consideration....

As far as I know, ADSL uses PPPoA http://en.wikipedia.org/wiki/Pppoa. This =
is how the ISP can have you authenticate before giving you an IP address an=
d consequently, you can be denied access before a 'connection' can be made.

Of course, the 'connection' is IP, which then runs over the ATM, as the nam=
e implies, Point to Point Protocol OVER ATM.

This may not be the case in all installation all over the world, but is the=
case here in NZ. MAC addresses, being unique by RFC definition are the und=
erlying magic in IP networks, but ATM magic happens at Layer 1 (connection)=
, so no MAC address required and consequently, your ISP can identify you an=
d have you authenticate before shelling out an IP address. I am not 100% ce=
rtain, having not worked with ATM before, but I assume the only way to uniq=
uely identify any ATM packet is by the switch port, which explains why a te=
chie has to connect your new ADSL before it will work (as opposed to dial u=
p that works from anywhere) and each provider requires access to the street=
cabinet. You can test this by taking your ADSL modem from one ISP to a fri=
ends house who belongs to another ISP. It does not work, hence the connecti=
on layer is the controlling authority.

The articles on Wikipedia are well written and easy to understand with good=
links.

I hope this helps.

Gund

________________________________________
From: Evan Platt [evan@espphotography.com]
Sent: Friday, 15 May 2009 14:34
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fwd: Home Web Server

At 07:05 PM 5/14/2009, you wrote:

>Shirley, you jest... how else could an equipment identify itself
>when turned on... I pressed COX CABLE after PURCASING DYNAMIC
>BUSINESS CABLE connection, only to find that they identified your
>EQUIPMENT before assigning a DYNAMIC IP from the pool... but already
>HAD a PERMANENT EQUIPMENT IP. They gave me that one, and for the
>past year I have enjoyed STATIC IP of 68.99.64.11
>
>Try it!

It's called a MAC address.

/snip=

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

RE: Fwd: Home Web Server
am 15.05.2009 05:20:16 von Evan Platt
That's correct.. There's layer 2 and then there's layer 3. The
initial connection to most ISP's take place with the MAC address, and
use arp traffic - it's not IP based.

Also, your DSL modem won't work with another ISP because the
languages spoken (simplistic terms) by the modems to the ISP are
different from ISP to ISP. SDSL modems MAY work, more likely than
ADSL, but same reasoning.

Essentially, there is no 'hidden' IP address. You have one IP
address. And most providers now, it's static even if it isn't.

I just looked, and I switched to Comcast the middle of March. I've
had the same IP since. Rebooted EVERYTHING a number of times -
computer, router, cable modem, etc.

At 07:52 PM 5/14/2009, you wrote:
>Just a consideration....
>
>As far as I know, ADSL uses PPPoA
>http://en.wikipedia.org/wiki/Pppoa. This is how the ISP can have you
>authenticate before giving you an IP address and consequently, you
>can be denied access before a 'connection' can be made.
>
>Of course, the 'connection' is IP, which then runs over the ATM, as
>the name implies, Point to Point Protocol OVER ATM.
>
>This may not be the case in all installation all over the world, but
>is the case here in NZ. MAC addresses, being unique by RFC
>definition are the underlying magic in IP networks, but ATM magic
>happens at Layer 1 (connection), so no MAC address required and
>consequently, your ISP can identify you and have you authenticate
>before shelling out an IP address. I am not 100% certain, having not
>worked with ATM before, but I assume the only way to uniquely
>identify any ATM packet is by the switch port, which explains why a
>techie has to connect your new ADSL before it will work (as opposed
>to dial up that works from anywhere) and each provider requires
>access to the street cabinet. You can test this by taking your ADSL
>modem from one ISP to a friends house who belongs to another ISP. It
>does not work, hence the connection layer is the controlling authority.
>
>The articles on Wikipedia are well written and easy to understand
>with good links.
>
>I hope this helps.

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Hot to write/deploy my Service under httpd
am 15.05.2009 09:04:17 von wenxing.zheng
=20
Hello all,

I am a newbie to httpd.
I wanna write my service based on the xml over https and deploy it=20
under the httpd.=20

can anyone give me some hints.
BTW, my service is written in C++.

Best regards,=20

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Index | Impressum | Datenschutz | XODOX